Manualshelf

Phau Ntawv Qhia

ManualsBrandsKUFATEC ManualsSuab BoosterKUFATEC VW Amarok 2H TSI Active Sound incl. Suab Booster
12345678910
8
Now fasten the control device for the noise generator incl. the Sound Booster near the on-board control
unit using workshop means.
Solder the twisted wires of the cable set for the CAN signal to the respective wire of the on-board control
unit, for this you have to disconnect the white plug from the on-board control unit Figure 4, 5 & 6
CAN Low (black/yellow) - PIN 18 (orange/brown wire)
CAN High (black/white) - PIN 19 (orange/black wire)
Figure 4 Figure 5
Figure 6