Corp. Mixer User Manual
SPECIFICATIONS 3115 TO 3142
1501 West 7th Ave., Brodhead, WI 53520
701 Cherry Ave., Greeley, CO 80632
DIMENSIONS (INCHES)
SPECIFICATIONS
1
Unit is equipped with most common options.
2
Horsepower requirements vary greatly with different
materials. Consult operators manual for proper motor sizing.
We reserve the right to change any equipment
specifications, design, or materials without notice. Contact
factory for nonagricultural use or heavier materials. US and
foreign patents filed.
Always read and understand the
Operators Manual and all Safety
Decals before using the
equipment.
SAFETY
FIRST
A - Overall Length - with motor mount 113 159 160 184 181 205
B - Overall Height - with rails and scales 64 64 69 69 83 83
C - Overall Width - with magnet tray 89 95 97 97 105 105
D - Height of Discharge - with rails and scales 17 18 19 19 28 28
E - Motor Mount to Center of Discharge Door 50 65 66 66 60 60
F - Overall Width Top Opening 71 78 81-1/2 81/1/2 87 87
G - Overall Length Top Opening 82 120 120 144 132 156
H - Height Reduction - less rails and scales 7 7 6-1/2 6-1/2 10 10
I - Length Reduction - less motor mount 12 36 36 NA
Unit Weight
1
- pounds 2,850 4,809 6,489 7,021 8,480 8.762
Mixing Capacity - cubic foot/bushels 147/118 216/174 250/200 300/240 360/288 420/340
Reel Diameter 52” 52” 60” 60” 68” 68”
Reel Drive Shaft Diameter 3” 3-1/2” 3-1/2” 3-1/2” 4” 4”
Reel Arms 344455
Reel Hopper Thickness 3/16” 3/16” 5/16” 5/16” 5/16” 5/16”
Reel Speed RPM 4.37 4.89 4.60 4.60 4.0 4.0
Lower Auger
Flighting Diameter 16” 16” 18” 18” 20” 20”
Flighting Thickness - Sectional 3/8” 3/8” 3/8” 3/8” 1/2” 1/2”
Tube-Outside Diameter 4” 4” 5-9/16” 5-9/16” 5-9/16” 5-9/16”
Drive Shaft Diameter 2” 2-1/2” 2-1/2” 2-1/2” 3” 3”
Upper Auger
Flighting Diameter 14” 14” 18” 18” 20” 20”
Flighting Thickness - Sectional 3/8” - H 3/8” - H 3/8” - H 3/8” - H 1/4” - S 1/4” - S
Tube-Outside Diameter 4” 4” 5-9/16” 5-9/16” 5-9/16” 5-9/16”
Drive Shaft Diameter 2” 2” 2-1/2” 2-1/2” 3” 3”
Auger Hopper Thickness 1/4” 1/4” 5/16” 5/16” 5/16” 5/16”
Side Sheets Thickness 10 ga. 10 ga. 10 ga. 10 ga. 10 ga. 10 ga.
End Sheets Thickness 10 ga. 10 ga. 3/16” 3/16” 3/16” 3/16”
Door Opening Size 20” x 16” 36"x20" 36"x20" 36"x20" 36"x20" 36"x20"
Oil Bath Front Front Front Front Rear Rear
Roller Chain Drive
50-60-80 60H-80-100H 60H-80H-100H 60H-80H-100H 80-100-120 80-100-120
Electric Drive (HP)
2
7-1/2-10 10 10 10-15 15-20 15-25
MODEL - STATIONARY 3115 3120 3125 3130 3136 3142