TRAILER PARTS MANUAL VERTICAL MIXER MODELS 5073, 5085 and 50100 Table Of Contents Abbreviations ................................................................................................. 2 Using This Service Parts Listing .................................................................... 3 Body Parts ..................................................................................................... 4 Light Kit ......................................................................................
5073TR 005907 R060706 Abbreviations Assy ................................................ Assembly A/R .............................................. As Required B ............................................................... Bolt Brg ...................................................... Bearing BSN .............................. Before Serial Number Btm ...................................................... Bottom C-Bolt ........................................ Carriage Bolt Cttr .....................
Using This Service Parts Listing This listing uses a number indentation system to specify the parts of an assembly. Any number which is indented to the right, indicates that it is a component of the item to the upper left. Example: Part no Qty Description 102-AAA # Assembly A 102-BBB # Sub-Assembly B (Component of A) 140-xxx # Sub-Component of B 140-xxx # Sub-Component of B 102-CCC # Sub-Assembly C (Component of A) etc.
5073TR 005907 R060706 Body Parts REF PART NO QTY DESCRIPTION 1 2 3 4 5 6 Haydog; Mtg. Hrd: 1/2” x 1 3/4”B, LN (1EA) Bent Hitch Pin, 1/2” DIA x 2 1/2” Swing Arm, Outer; Mtg. Hrd: 1/2” x 1 1/2” B, LN,Includes T-bolt Spacer Pad” Swing Arm, Inner Shield, Drive; Mtg Hrd: 5/16” x 1”B, Belleville Washer,LN(2EA) (5073 ONLY) Shield, Drive - Front; Mtg Hrd: 3/8” x 1”B, Belleville Washer,LN(2EA) (5085 & 50100 ONLY) Shield, Drive - Rear (5085 & 50100 ONLY) Clevis Mount; Mtg.
073TR 005907 R060706 Body Parts REF PART NO 1 2 3 4 174-676 174-838 174-840 174-839 QTY 1 1 1 1 DESCRIPTION Jack, Sidewind 10,000lb Jack Mount Pin (includes “R” clip) Crank Assembly Jack Mount Tube (weld on) Light Kit REF PART NO 1 2 3 4 5 6 174-675 174-673 174-674 174-725 174-775 174-724 172-110 QTY 1 2 2 4 1 4 1 DESCRIPTION Light Kit Light, Amber Light, Red Grommet Wire Harness Light Connector (pigtail only) 7 Pin Connector (SAE J560B) Kuhn Knight, Inc. 1501 West 7th Ave.
5073TR 005907 R060706 Wheel and Hub Parts - 5073 REF PART NO QTY DESCRIPTION 1 2 3 4 5 6 7 8 9 10 11 12 13 174-755 173-001 172-999 173-031 174-784 170-920 173-032 173-002 174-757 174-756 173-007 174-804 170-023 1 1 1 1 10 10 1 1 1 1 1 1 1 Grease Seal; Transcom #37605SA Bearing Cone; HM218248 Hub, Wheel 10 Hole Bearing Race; HM218210 Stud, Wheel, 3/4” NF Lug Nut; 3/4” NF Bearing Race; HM212011 Bearing Cone; HM212049 Washer Spindle 2 1/16” x 4” Nut; Castle Cover; Mtg.
5073TR 005907 R060706 Undercarriage Parts - 5085 and 50100 (S/N 5085-B0001, 50100 C0001 and after) 7 1064 6 3 1 12 21 24 22 25 13 10 14 20 4 2 5 REF PART NO 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 21 22 23 24 25 QTY 104-646 1 104-559 1 103-844 1 103-910 1 103-911 1 103-908 1 103-909 1 141-569 2 141-967 1 141-574 1 173-006 2 173-001 2 172-999 2 173-031 1 174-784 10 170-023 1 170-920 10 173-032 1 173-002 2 173-003 2 173-004 2 173-005 2 173-007 2 175-174 4 171-653 4 174-57
5073TR 005907 R060706 Undercarriage Parts - 5085 and 50100 (After S/N 5085-054, 50100-069, Before S/N 5085-B0001, 50100 C0001) REF PART NO 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 8 103-906 103-779 103-844 141-574 103-911 103-910 103-909 103-908 141-967 141-569 172-999 173-031 174-784 170-920 173-032 173-002 173-003 173-004 173-005 173-007 173-006 173-001 175-174 171-653 174-577 174-979 QTY 1 1 1 1 1 1 1 1 1 2 2 1 10 10 1 2 2 2 2 2 2 2 4 4 4 4 DESCRIPTION Undercarriage with Bogies
5073TR 005907 R060706 Undercarriage Parts - 5085 and 50100 (Before S/N 5085-055, 50100-070*) REF PART NO 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 103-906 103-779 103-844 134-843 102-049* 102-048* 102-065* 102-066* 134-824 172-396 172-361 174-784 170-920 170-922 170-921 170-927 170-928 173-005 170-926 172-362 172-360 175-174 171-653 174-577 174-979 QTY 1 1 1 1 1 1 1 1 2 2 1 10 10 1 2 2 2 2 2 2 2 4 4 4 4 DESCRIPTION Undercarriage with Bogies Clevis; Mtg Hrd: 3/4” x 4 1/2” GRD-8 B, LN T
5073TR 005907 R060706 Input Shaft and Pinion Gear Drive Parts REF PART NO QTY DESCRIPTION 1 Flange Bearing, Ecc. Lock 1 3/4”; Mtg Hrd: 1/2” x 1 3/4” B, LW, Nut (6EA)(5073 only) Flange Bearing, Ecc. Lock 1 3/4”; Mtg Hrd: 1/2” x 1 3/4” B, LW, Nut (6EA)(5085 & 50100 only) Flange Bearing, Ecc.
5073TR 005907 R060706 Gearbox 12 13 11 10 14 9 16 15 13 8 6 1084 4 5 4 3 1 2 18 17 1 REF PART NO 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 174-873 175-014 175-015 175-016 174-904 175-017 175-018 173-344 174-905 175-020 175-021 175-022 175-023 175-024 175-025 175-026 175-027 175-028 175-029 175-030 175-031 QTY 1 1 1 10 2 1 1 1 1 16 2 1 1 3 2 1 1 1 1 1 1 14 13 10 19 20 7 9 DESCRIPTION Gearbox Assembly, 4.25:1 Gear, Bevel, Pinion set Casting Bolt, HEXHD, M10 x 22MM 8.
5073TR 005907 R060706 Auger Drive and Tower Assembly Parts Serial Number (5073-A0012, 5085-064, 50100-083 and After) REF PART NO QTY* DESCRIPTION 1 2 3 Auger Drive Shaft; 5” Dia Stud, Wheel;3/4” x 3 1/8” Front Tower; Mtg Hrd: 174-948 Plow Bolt, 3/4” x 2-1/2” (23ea) Rear Tower; Mtg Hrd: 174-948 Plow Bolt, 3/4” x 2-1/2” (23ea) Bearing, Plastic; 5”ID x 5” Quad-Ring Seal; 5”ID Thrust Washer Thrust Plate Inspection cover; Mtg Hrd: 5/16” x 3/4” SSB (3EA) Foam Rubber Seal; 3/8” x 3/4” (48’ Total for unit) Bul
Auger Drive and Tower Assembly Parts 5073TR 005907 R060706 Used on Units,Serial Number (5073-A0012, 5085-064, 50100-083 and After) REF 13 14 15 PART NO 172-289 174-769 180-768** 16 17 18 19 170-865 174-762 172-024 173-583 175-344 170-244 142-240 20 21 QTY* 1 2 3 3 3 12 3 3 A/R DESCRIPTION Snap Ring; 5” External, Waldes 5100 series Magnet (4 Total for unit) Copper Grease Line 1/4”;(Front Upper Plate 87“, Front Upper Bearing 87”, Front Lower Bearing 84”) (Rear Upper Plate 99“, Rear Upper Bearing 99”
5073TR 005907 R060706 Auger Drive and Tower Assembly Parts Used on Units,Serial Number (5073-A0011, 5085-063, 50100-082 and Before) REF PART NO 1 2 3 4 5 6 7 8 9 103-806 174-784 141-084 300-059 103-820A 103-811 103-812 141-595 141-046A 174-980 141-048 180-768 QTY* 1 6 1 1 1 1 1 2 2 2 1 1 181-036**B 10 11 170-865 172-024 2 3 DESCRIPTION Auger Drive Shaft; 5” Dia Stud, Wheel;3/4” x 3 1/8” Thrust Washer, Nylon; 7-3/4” OD x 5-1/16” ID x 3/8” Thrust Washer Kit - Retrofit Thrust Plate Front Tower; Mtg Hrd
Auger Drive and Tower Assembly Parts 5073TR 005907 R060706 Used on Units,Serial Number (5073-A0011, 5085-063, 50100-082 and Before) REF PART NO QTY* DESCRIPTION 12 Stratght Adapter; 1/4” Tube x 1/8” NPTF M Straight Adapter; 3/16” Tube x 1/8” NPTF M Grommet, Rubber; 1” x 1/4” x 1/4” (Not Shown) Grommet, Rubber; 3/4” x 3/16” x 3/16”(Not Shown) Pipe Coupling; 1/8” STD NPT (weld on) Washer, 3/8” Stainless Steel Line; (24” total) Bull Gear Shim (1/4”) Shim (1/16”) Washer; 3/16” x 8” x 5 1/16” ID Snap Ring;
5073TR 005907 R060706 Auger Assembly Parts - 5073 Front (S/N B0001 and After) 12 15 16 14 2 4 5 3 1 1065 13 REF PART NO 1 2 3 4 5 6 7 8 9 10 11 12 13* 14 15 16 103-922 141-156 141-155 141-062 141-157 104-640 141-066 141-065 141-113 141-063 141-134 141-064 141-114 144-198 141-406 170-920 174-793 13 QTY 1 1 1 1 1 4 1 1 1 1 1 1 4 4 2 6 6 6 7 8 9 10 DESCRIPTION Auger Assembly, 5073 Front Top Flighting, 46” OD x 20” ID x 5/8” (weld on) Middle Flighting , 46” OD x 20” ID x 5/8” (weld on) Flight
Auger Assembly Parts - 5073 Front (Before S/N B0001*) REF PART NO 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 QTY 5073TR 005907 R060706 DESCRIPTION 141-064 1 Auger Cover;Mtg hrd; 3/8” x 1 1/4” SSB, LW(2EA) 103-922* 1 Auger Assembly, 5073 Front 141-156 1 Top Flighting, 46” OD x 20” ID x 5/8” (weld on) 141-155 1 Middle Flighting, 46” OD x 20” ID x 5/8” (weld on) (space intentionally left blank) 141-157 1 Lower Flighting, 69-3/8” x 36-5/16” x 3/4” (weld on) 141-062 1 Flighting Brace (weld on) 141-066
5073TR 005907 R060706 Auger Assembly Parts - 5073 Rear REF PART NO QTY 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 DESCRIPTION 141-064 1 Auger Cover;Mtg hrd; 3/8” x 1 1/4” SSB, LW(2EA) 103-925 1 Auger Assembly, 5073 Rear 141-156 1 Top Flighting, 46” OD x 20” ID x 5/8” (weld on) 141-155 1 Middle Flighting, 46” OD x 20” ID x 5/8” (weld on) (space intentionally left blank) 141-157 1 Lower Flighting, 69-3/8” x 36-5/16” x 3/4” (weld on) 141-062 1 Flighting Brace (weld on) 141-066 1 Sharktooth (weld on) 1
5073TR 005907 R060706 Auger Assembly Parts - 5085 Front (S/N B0001 and After) 12 2 15 16 4 14 6 13 13 1 5 3 1066 8 9 10 11 7 REF PART NO 1 2 3 4 5 6 7 8 9 10 11 12 13* 14 15 16 103-923 141-287 141-333 141-062 141-157 141-066 104-640 141-065 141-113 141-063 141-134 141-064 141-114 144-198 141-406 170-920 174-793 QTY 1 1 1 1 1 1 4 1 1 1 1 1 5 5 5 6 6 DESCRIPTION Auger Assembly, 5085 Front Top Flighting, 46” OD x 20” ID x 5/8” (weld on) Middle Flighting, 46” OD x 20” ID x 5/8” (weld on) Fli
5073TR 005907 R060706 Auger Assembly Parts - 5085 Front (Before S/N B0001*) REF PART NO 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 QTY DESCRIPTION 141-064 1 Auger Cover;Mtg hrd; 3/8” x 1 1/4” SSB, LW(2EA) 103-923* 1 Auger Assembly, 5085 Front 141-287 1 Top Flighting, 46” OD x 20” ID x 5/8” (weld on) 141-333 1 Middle Flighting, 46” OD x 20” ID x 5/8” (weld on) (space intentionally left blank) 141-157 1 Lower Flighting, 69-3/8” x 36-5/16” x 3/4” (weld on) 141-062 1 Flighting Brace (weld on) 141-066
AugerAssembly Parts - 5085 Rear REF PART NO QTY 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 5073TR 005907 R060706 DESCRIPTION 141-064 1 Auger Cover;Mtg hrd; 3/8” x 1 1/4” SSB, LW(2EA) 103-926 1 Auger Assembly, 5085 Rear 141-287 1 Top Flighting, 46” OD x 20” ID x 5/8” (weld on) 141-333 1 Middle Flighting, 46” OD x 20” ID x 5/8” (weld on) (space intentionally left blank) 141-157 1 Lower Flighting, 69-3/8” x 36-5/16” x 3/4” (weld on) 141-062 1 Flighting Brace (weld on) 141-066 1 Sharktooth (weld on) 14
5073TR 005907 R060706 Auger Assembly Parts - 50100 Front (S/N C0001 and After) 13 16 17 15 2 3 5 14 8 14 6 1 1067 4 REF PART NO 1 2 3 4 5 6 7 8 9 10 11 12 13 14* 15 16 17 103-924 141-287 141-286 141-155 141-062 141-157 104-640 141-066 141-065 141-113 141-063 141-134 141-064 141-114 144-198 141-406 170-920 174-793 QTY 1 1 1 1 1 1 4 2 1 1 1 1 1 5 5 5 6 6 9 7 10 11 DESCRIPTION Auger Assembly, 50100 Front Top Flighting, 46” OD x 20” ID x 5/8” (weld on) Middle Flighting, 46” OD x 20” ID x 5/8” (we
Auger Assembly Parts - 50100 Front (Before S/N C0001*) REF PART NO 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 141-064 103-924* 141-287 141-286 141-155 141-157 141-062 141-066 141-065 141-113 141-063 141-134 141-469 141-470 141-468 141-114 141-406 174-793 170-920 QTY 1 1 1 1 1 1 1 2 1 1 1 1 2 2 2 5 5 6 6 5073TR 005907 R060706 DESCRIPTION Auger Cover;Mtg hrd; 3/8” x 1 1/4” SSB, LW(2EA) Auger Assembly, 50100 Front Top Flighting, 46” OD x 20” ID x 5/8” (weld on) Middle Flighting, 46” OD x 20” ID x 5/8
5073TR 005907 R060706 Auger Assembly Parts - 50100 Rear REF PART NO 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 QTY DESCRIPTION 141-064 1 Auger Cover;Mtg hrd; 3/8” x 1 1/4” SSB, LW(2EA) 103-927 1 Auger Assembly, 50100 Rear 141-287 1 Top Flighting, 46” OD x 20” ID x 5/8” (weld on) 141-286 1 Middle Flighting, 46” OD x 20” ID x 5/8” (weld on) (top) 141-155 1 Middle Flighting, 46” OD x 20” ID x 5/8” (weld on) (bottom) 141-157 1 Lower Flighting, 69-3/8” x 36-5/16” x 3/4” (weld on) 141-062 1 Flighting Br
5073TR 005907 R060706 Door and Cylinder Parts REF PART NO QTY DESCRIPTION 1 2 3 4 5 6 7 8 9 10 11 12 13 Door Assembly Linkage Spacer Tube Flat Washer, 1” Hair pin, .16 dia x 3.12 Clevis Pin, 1” dia x 2.50 Lever Arm Hydraulic Cylinder; 2.
5073TR 005907 R060706 Door and Cylinder Parts 5073-068 and Before REF PART NO 1 2 3 4 5 6 7 8 9 10 11 12 26 103-872 174-822 173-483 174-843 171-202 170-233 173-653 173-285 171-030 172-793 103-821 174-772 QTY 1 1 1 1 1 2 1 1 1 1 1 4 DESCRIPTION Door Cylinder Mount; Mtg Hrd; 1/2” x 1 1/2” C-bolt, LN(4EA) Hydraulic Cylinder; 2” x 30” (Seal Kit 174-823) Straight Adapter Relief Valve Hydraulic Hose; 1/4” x 31 1/2” Straight Adapter; Swivel Tee Adapter Hydraulic Hose; 1/4” x 234” Adapter,3/8” x 90° Hydraulic
5073TR 005907 R060706 Slide Tray Parts REF PART NO QTY DESCRIPTION 1 2 3 4 5 6 7 8 9 1 1 2 1 2 1 2 1 5.4’ Slide Tray Assembly, LH Discharge Pivot Rod, 7/8” x 46-5/8”; Mtg. Hrd: Cotter Pin 3/16” x 2” (2EA) Magnet; Mtg.
5073TR 005907 R060706 4 Auger Discharge Parts REF PART NO 1 2 3 4 5 6 7 8 9 28 103-856 103-855 102-346* 103-854** 101-231 171-265 101-227 171-259 171-260 171-782 132-701 171-932 QTY DESCRIPTION 1 1 1 1 4 A/R 4 1 1 1 1 3 Complete Chute Assembly, 3’ Complete Chute Assembly, 2’ Chute Weldment, 3’ Chute Weldment, 2’ Chain Tightener Arm Shim; .017" Thick (1-2 each for auger adjustment) Auger Bearing Assy; Mtg Hrd: 3/8" x 1" Bolt, Lw, Nut (3 ea)170-865 Zerk; (1 ea) Bushing; Bronze, 1-3/8" I.D.
5073TR 005907 R060706 4 Auger Discharge Parts REF PART NO QTY 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 171-330 134-390 171-178 134-394 170-262 170-118 170-302 171-576 134-389 170-056 170-110 102-347 171-346 140-001 141-608 2 3 1 1 1 1 1 1 1 4 4 1 2 1 1 25 133-943* 140-938** 133-942* 140-937** 140-897* 140-933** 101-736* 103-756** 171-186 134-395 103-918 133-952 170-122 173-021 170-122 174-927 174-928 170-235 171-151 171-136 171-668 171-666 171-883 170-859 173-220 171-030 175-062 171-193 2 2 2 2
5073TR 005907 R060706 Chain and Slat Discharge Parts 30 © Copyright 2004 Kuhn Knight, Inc.
Chain and Slat Discharge Parts REF PART NO QTY 103-898 1 1 103-893 1 2 103-895 1 3 170-120 1 4 103-894 1 103-919 A/R 171-288 A/R 171-287 A/R 5 142-217 1 6 142-214 1 7 170-026 2 8 134-389 2 9 171-178 1 10 171-883 1 11 171-666 1 12 141-204 1 13 171-668 1 171-151 1 14 141-606 1 15 103-897 1 16 103-918 1 17 18 19 20 21 22 23 24 25 141-474 141-472 141-473 170-238 170-110 174-309 141-216 141-220 141-608 1 1 1 2 2 2 2 2 1 26 27 28 29 30 31 32 33 34 35 36 37 38 140-003 173-220 170-122 170-235 141-692 171-171 17
5073TR 005907 R060706 High-Speed Clean-Out Option - (5073 & 5085 S/N B0001, 50100 S/N C0001 and after) 4 5 2 3 1 8 12 11 10 6 7 1079 13 REF PART NO QTY 1 175-228 1 2 3 4 170-679 173-150 175-082 175-124 174-909 144-307 144-264 175-229 175-255 175-124 174-909 144-295 144-267 175-227 175-093 175-276 175-274 172-627 175-240 176-303 175-275 175-536 176-064 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 1 2 2 5 6 7 8 9 10 11 12 13 14 15 16 32 14 15 DESCRIPTION 9 16 Gearcase, 1:3.
5073TR 005907 R060706 High-Speed Clean-Out Option - (Before 5073 & 5085 S/N B0001, 50100 S/N C0001) 5 4 1 2 3 17 8 6 7 5 2 4 3 1 8 11 10 6 7 1095 12 13 15 14 11 10 9 16 12 13 5073 14 15 9 16 5085 & 50100 REF PART NO QTY DESCRIPTION 1 175-228 1 Gearcase, 1:3.
5073TR 005907 R060706 High-Speed Clean-Out Option - Gearcase Replacement Parts REF PART NO 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 34 175-228 176-197 176-198 176-199 176-200 176-201 174-904 176-202 176-203 173-342 176-204 174-610 176-205 176-206 176-207 176-208 176-209 173-342 QTY DESCRIPTION 1 1 3 4 1 1 4 1 2 2 1 8 1 1 1 4 1 1 Gearcase Assy Cap Snap Ring Bearing Key Gear Plug Shaft Oil Seal Plug Flange Bolt Cover Pinion Double Lip Seal Bolt Elbow Oil Filler Plug © Copyright 2004 Kuhn Knight, Inc
5073TR 005907 R060706 Selector Valve Option REF PART NO 1 2 3 4 5 6 7 8 9 10 11 12 13 101-791 101-891 140-792 140-790 140-791 171-430 171-136 172-324 171-426 170-513 171-425 171-428 170-465 170-235 QTY 1 1 1 1 1 6 6 2 2 2 2 1 1 2 DESCRIPTION Control Handle; Mtg Hrd: 1/4” x 1-1/2” B, LN Selector Valve Assy.
5073TR 005907 R060706 PTO Driveline (1000 RPM - 21 - Spline -1 3/8 Yoke) After S/N 5073-066 REF PART NO 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 36 175-080 175-001 174-984 174-996 174-909 174-994 174-985 174-986 174-992 171-979 171-550 172-210 174-991 175-083 174-988 174-987 175-084 174-966 174-993 172-040 172-210 175-071 171-799 172-207 172-209 171-979 174-909 174-994 QTY 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 DESCRIPTION Complete PTO Assembly Half Shaft Yoke 1
5073TR 005907 R060706 PTO Driveline (1000 RPM - 21 -Spline-1 3/8 Yoke) Before S/N 5073-065 REF 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 PART NO QTY 174-883 175-001 1 174-984 1 174-996 1 174-909 1 174-994 1 174-985 1 174-986 1 174-992 1 171-979 1 171-550 1 172-210 1 174-991 1 175-002 1 174-988 1 174-987 1 174-989 1 174-995 1 174-993 1 172-040 1 172-210 1 174-991 1 171-799 1 172-207 1 172-209 1 171-979 1 174-909 1 170-369 1 174-994 1 DESCRIPTION Complete PTO Assembly Half Shaft
5073TR 005907 R060706 PTO Driveline (1000 RPM - 20 - Spline -1 3/4 Yoke) REF PART NO 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 38 QTY 175-081 175-060 1 175-059 1 174-967 1 174-909 1 174-994 1 174-985 1 174-986 1 174-992 1 171-979 1 171-550 1 172-210 1 174-991 1 175-083 1 174-988 1 174-987 1 175-084 1 175-278 1 174-993 1 172-040 1 172-210 1 175-071 1 171-799 1 172-207 1 172-209 1 171-979 1 174-909 1 174-994 1 DESCRIPTION Complete PTO Assembly Half Shaft Yoke 1 3/4 - 20 Spline Col
5073TR 005907 R060706 Side Extension Options REF PART NO QTY 1 141-318 2 181-043 DESCRIPTION 4 Plastic Side Extension 5073, Mtg Hrd; 5/16” x 1 1/2” B,5/16 x 1 1/4”B (5EA), 3/8”Fw (7EA),FLN(6EA) 25.5’ Rubber Belting; 3/8” x 8”,Mtg Hrd: 5/16” x 1 1/4” B,(10EA), 3/8” Fw(12EA), Fln (10EA) (12’-9”’ per side) (5073 only) 27.5’ Rubber Belting; 3/8” x 8”, Mtg Hrd: 5/16” x 1 1/4” B,(10EA), 3/8” FW(12EA), FLN(10EA) (13’-9”’ per side) (5085 only) 28.
5073TR 005907 R060706 Decal and Paint List The following decals are listed below for your convenience. Use the operator’s manual for decal location and part number ordering.
Hardware Part Number Listing 5073TR 005907 R060706 All fasteners are NC thread, Grade 5 unless otherwise specified. HEX HEAD BOLTS Size ..................................... Part No 1/4 x 1/2 ............................. 173-279 1/4 x 3/4 ............................. 170-803 1/4 x 7/8 ............................. 171-094 1/4 x 1 ................................ 170-310 1/4 x 1-1/2 .......................... 170-068 1/4 x 2 ................................ 172-986 1/4 x 2 (Grade 8) ................
5073TR 005907 R060706 Hardware Part Number Listing 5/8 x 2-1/2 (Grade 5) .......... 174-790 PLOW BOLTS 5/8 x 2 ................................ 174-767 3/4 x 2-1/2 .......................... 174-948 TRUSS HEAD BOLTS #6-32 x 3/4 ......................... 172-416 #6-32 x 1 ............................ 173-079 #8-32 x 1-1/2 ...................... 171-210 #10-32 x 3/4 ....................... 171-604 #10-32 x 1 .......................... 172-882 1/4 x 3/4 ............................. 170-193 1/4 x 1 ..........
5073TR 005907 R060706 Part Number Index 101-227 ...28 101-231 ...28 101-736 ...29 101-791 ...35 101-891 ...35 102-048 ...9 102-049 ...9 102-065 ...9 102-066 ...9 102-346 ...28 102-347 ...29 102-437 ...4 102-439 ...4 102-527 ...27 103-674 ...4 103-678 ...4 103-756 ...29 103-779 ...4, 8, 9 103-806 ...14 103-811 ...14 103-812 ...14 103-817 ...12, 15 103-820 ...14 103-821 ...26 103-844 ...7, 8, 9 103-845 ...7 103-854 ...28 103-855 ...28 103-856 ...28 103-872 ...26 103-882 ...25 103-893 ...31 103-895 ...
5073TR 005907 R060706 Part Number Index 172-367 ...10 172-603 ...40 172-627 ...32, 33 172-786 ...40 172-793 ...25, 26 172-820 ...40 172-822 ...15 172-999 ...6, 7, 8 173-001 ...6, 7, 8 173-002 ...6, 7, 8 173-003 ...7, 8 173-004 ...7, 8 173-005 ...7, 8, 9 173-006 ...7, 8 173-007 ...6, 7, 8 173-008 ...6 173-021 ...29 173-031 ...6, 7 173-032 ...6, 7, 8 173-040 ...40 173-077 ...39 173-078 ...40 173-150 ...32, 33 173-170 ...6 173-171 ...6 173-172 ...6 173-173 ...6 173-174 ...6 173-220 ...29, 31 173-270 ...