Datasheet
Solenoids are classified as being of open
design, i. e. with a visible, not mechani-
cally protected coil, or of closed design,
where the coil is protected by the hou-
sing or a separate plastic case. The volu-
me of a solenoid is the deciding factor
for the stroke work done, the product of
force x stroke. Within a given size of de-
sign the stroke work can be adapted by
coil design, i. e. different switch on peri-
ods or different relative positions of the
magnetic poles (conical or flat face arma-
ture), to the power requirement. In this
context the rated voltage of the magnetic
coil (12 V, 24 V, 60 V, etc.) is generally
of little importance.
Preferred types linear solenoids
The solenoids listed in the table are
preferred types and are always in stock,
enabling you to have them delivered
quickly and at a competitive price for
your tests.
The preferred types can be delivered
within a week (in small numbers), condi-
tional to no resale.
They are designed to operate at 24 V
DC and at 100 % ED (not applicable to
bistable systems).
If an adjustable voltage source is used,
the solenoid can be operated at a higher
voltage than that given in the rating, in
order to obtain the required power.
For the calcualtion please refer to
page 20.
The BI 8, 13 and 17 solenoids are bi-
stable devices. The armature is held into
its rest position by a return spring and in
its final/end position by a permanent
magnetic force. The armature moves to
its final position when an electrical impul-
se is applied to the coil in the forward
direction.
The stroke force diagrams are produced
from measurements of actual solenoids
with rated voltage.
Please note that the available force is the
difference between the return spring
tension and the magnetic force.
Man unterscheidet Magnete in offener
Bauweise, d. h. mit mechanisch unge-
schütztem, sichtbarem Spulenkörper, und
Magnete in geschlossener Bauweise, bei
denen der Spulenkörper durch ein ge-
schlossenes Gehäuse oder einen Kunst-
stoffmantel geschützt ist. Das Bauvolumen
eines Magneten ist entscheidend für die
Hubarbeit, dem Produkt aus Kraft mal
Hubweg. Innerhalb einer Baugröße kann
die Hubarbeit durch die Spulenaus-
legung, d. h. Auslegung für unterschied-
liche Einschaltdauer, und durch Aus-
bildung der Magnetpolverhältnisse, d. h.
Konus-- oder Flachanker, an den Kraft-
bedarf angepasst werden. Für die Hub-
arbeit ist es in der Regel unwesentlich, für
welche Nennspannung die Magnetspule
(12 V, 24 V, 60 V usw.) ausgelegt ist.
Vorzugstypen Hubmagnete
Die nebenstehenden Hubmagnete
werden als Vorzugstypen lagermäßig
geführt, damit Sie einen schnellen und
preisgünstigen Zugriff für Ihre Versuche
haben. Die Vorzugtypen sind in kleinen
Stückzahlen (Zwischenverkauf vorbehal-
ten) innerhalb einer Woche lieferbar.
Sie sind ausgelegt für 24 V DC und
100 % ED (gilt nicht für bistabile
Systeme).
Bei Verwendung einer verstellbaren
Spannungsquelle, kann der Magnet über
die Nennspannung hinaus betrieben
werden, um die für die Betätigung er-
forderliche Kraft zu erreichen.
Die Berechnung hierzu ersehen Sie bitte
aus Seite 20.
Die Magnettypen BI 8,13, 17 sind bi-
stabile Systeme, wobei der Anker in der
Anfangslage durch permanent-magneti-
sche Kraft gehalten wird. Bei Impuls-
betrieb wird der Anker je nach Polarität
der Spule in seine jeweilige Endlage
bewegt. Die aufgezeigten Magnetkraft-
kennlinien beziehen sich auf die Nenn-
spannung. Zu beachten ist, dass die nutz-
bare Kraft die Differenzkraft zwischen Fe-
derkraft und Magnetkraft ist.
Hubmagnete
Offene Bauweise
Technische Beschreibung/
Vorzugstypen
Linear Solenoids
Open Frame
Technical description/
Preferred types
41 KUHNKE Solenoid Catalogue 01/10KUHNKE Magnetkatalog 01/10
Ident. Nr. Bestell-Bezeichnung
Ident. No.
29265 BI 8
Order Code
F 24V DC 15% ED
17.982
51273
94135
55944
BI 13
BI 17
F
F
BI 34
MM 15
F
F
24V DC
24V DC
25% ED
25% ED
24V DC
24V DC
25% ED
100% ED
54854
54855
54857
17101
HM 107
HM 157
F
F
HM 257
HU 240
F
F
13297
17102
17116
21655
HU 244
HU 320
F
F
HU 324
H 2206
F
F
24V DC
24V DC
100% ED
100% ED
24V DC
24V DC
100% ED
100% ED
24V DC
24V DC
100% ED
100% ED
24V DC
24V DC
100% ED
100% ED
50951
74790
66541
48423
H 2246
H 2286 R
F
F
H 2406
H 2446
F
F
74607
47092
48444
74784
H 2486 R
H 3206
F
F
H 3246
H 3286 R
F
F
24V DC
24V DC
100% ED
100% ED
24V DC
24V DC
100% ED
100% ED
24V DC
24V DC
100% ED
100% ED
24V DC
24V DC
100% ED
100% ED
46729
52035
74603
17321
H 3406
H 3446
F
F
H 3486 R
H 4206
F
F
14235
74818
52041
48452
H 4246
H 4286 R
F
F
H 6206
H 6246
F
F
24V DC
24V DC
100% ED
100% ED
24V DC
24V DC
100% ED
100% ED
24V DC
24V DC
100% ED
100% ED
24V DC
24V DC
100% ED
100% ED
74670
79181
74752
76205
H 6286 R
H 08
F
F
H 09
H 12
F
F
108052 HD 8286 R F
24V DC
24V DC
100% ED
100% ED
24V DC
24V DC
100% ED
100% ED
24V DC 100% ED