User Manual

04
Controller parameter reference
LED indication description
Operating voltage
Operating current
Static current
Vibrating current
USB input voltage/current
Available distance
Battery voltage/capacity
Battery power-on time
Charging time
Static time
Net weight
Dimension
Packing list
Specification
DC 3.7V-4.2V
20-30mA
20-80uA
50-150mA
DC 5.0V/500mA
≤10m
3.7V / 600mAh
Around 8 hours (fully charged)
Around 2-3 hours
Around 30 days
191g (225g including a charging cable and a
user guide)
151*107*62mm
1 x controller, 1 x charging cable, 1 x user guide
1) Four LEDs blinking quickly and circularly: This controller is searching for wireless
devices to be paired.
2) LED(s) solid bright: This controller is connecting to the console normally via wireless.
3) LED(s) blinking quickly: This controller battery voltage is lower than 3.6V; if the
voltage is lower than 3.4V, the controller will be shut off automatically and can’t
be powered on.
4) LED(s) blinking slowly: This controller is connecting to the console via USB cable;
when this controller is being charged via connecting to a charger, four LEDs are
blinking slowly, and simultaneously, the four LEDs will be off after fully charged.
Remark: The above parameters are for references only, they are subject to
the actual product.
The four LEDs in the controller start to flash slowly for 2 seconds, and then the
controller driver is automatically installed to the PC, after connect, LED1 and LED4
will flash slowly always, the controller can be used. Support for X-360 mode games.
The X-360 driver is available on the internet.
Note: With vibration function but without motion sensing function under X-360 mode
wired connection.