Installation Manual

To find out more about pairing a Kuna Companion, click here. To set up a Toucan camera, click
here.
Because this process uses the Bluetooth on your mobile device, you will need to be close to your
Smart Security Light. We recommend holding your mobile device no more than 5 feet away
from your light during this initial pairing process.
If there are multiple Smart Security Lights in the area, like in the screen shot below, the mobile
app will tell you which one is the closest. The one that you are pairing should have the strongest
Bluetooth signal, so make sure that you're standing close to it. If the app displays multiple
devices, the one you're setting up should have the strongest Bluetooth signal. Make sure you're
standing close to it.
Once you have identified the closest Smart Security Light, tap that device's name to continue the
setup process. If there is only one device in the area, then you can choose that one. In the screen
shot below, we will choose New Device 1.