Manualshelf

Certificate

ManualsBrandsKunbus ManualsAutomationExpansion card Kunbus GW Powerlink Slave
12
C E R T I F I C A T E O F C O M P L I A N C E
C
ertificate Number
E494534
Report Reference
E494534-20190521
Issue Date
2020-JUNE-25
Bruce Mahrenholz, Director North American Certification Program
UL LLC
Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please
contact a local UL Customer Service Representative at
http://ul.com/aboutul/locations/
Page 1 of 2
Issued to:
KUNBUS GmbH
Heerweg 15c
73770 Denkendorf GERMANY
This certificate confirms
that
representative samples of
PROGRAMMABLE CONTROLLERS
See next page for models
Have been investigated by UL in accordance with the
Standard(s) indicated on this Certificate.
Standard(s) for Safety:
UL61010-1, Safety Requirements for Electrical Equipment
for Measurement, Control, and Laboratory Use - Part 1:
General Requirements
CAN/CSA C22.2 No. 61010-1-12,
Safety Requirements for Electrical Equipment for
Measurement, Control, and Laboratory Use - Part 1:
General Requirements
See the UL Online Certifications Directory at
https://iq.ulprospector.com for additional information.
This Certificate of Compliance does not provide authorization to apply the UL Mark. Only the UL Follow-Up
Services Procedure provides authorization to apply the UL Mark.
Only those products bearing the UL Mark should be considered as being UL Certified and covered under UL’s
Follow-Up Services.
Look for the UL Certification Mark on the product.

Summary of content (2 pages)