DF PROFINET IO CPCI Installation Instructions V1.3/23.06.2017 KUNBUS DF PROFINET IO CPCI – Installation Instructions - V1.3/23.06.
h:\dokumente\project\700361_df_profinet_io_controller\anwenderdoku\installation\cpci\version_1.3\df_profinet_io_cpci_e.doc Revision History Version Date V1.3 V1.2 V1.1 V1.0 23.06.2017 05.04.2017 01.04.2015 13.11.2013 Version V1.3 Description Resp.
Installation Instructions Contents Contents 1 Safety Instructions ........................................................................................................ 1 2 Installation of the Board ................................................................................................ 2 3 Description of the LED's................................................................................................ 3 4 Technical Data ............................................................
Contents Installation Instructions List of Figures Figure 1: DF PROFINET IO CPCI - Board ............................................................................. 2 ii DF PROFINET IO CPCI-Installation Instructions-V1.3/23.06.
Installation Instructions Contents List of Tables Table 1: Technical Data ......................................................................................................... 4 KUNBUS DF PROFINET IO CPCI-Installation Instructions-V1.3/23.06.
Contents Installation Instructions Blank page iv DF PROFINET IO CPCI-Installation Instructions-V1.3/23.06.
DF PROFINET IO CPCI - Installation Instructions 1 Safety Instructions Safety Instructions WARNING: Disregarding this warning may result in damage to equipment and/or serious personal injury. Only qualified personnel may start up and operate this device. According to the safety instructions in this text, qualified personnel are persons who are authorized to start up, to ground, and to mark devices, systems, and equipment according to the standards of safety technology.
Installation of the Board 2 DF PROFINET IO CPCI - Installation Instructions Installation of the Board The DF PROFINET IO CPCI is a Plug&Play-compatible board. The configuration entirely takes place by means of the delivered software or the BIOS of your PC respectively. Thus, no jumpers or DIP-switch adjustments are necessary. To mount the board, please proceed as follows: Please see also the operating instructions of your PC.
DF PROFINET IO CPCI - Installation Instructions 3 Description of the LED's Description of the LED's Green LED: On: Firmware loaded and started Off: Firmware not loaded Yellow LED: On: PROFINET IO started Off: PROFINET IO stopped Red LED: Operation as PROFINET IO Controller on Ethernet Interface 1 On: PROFINET IO-Failure (min.
Technical Data 4 DF PROFINET IO CPCI - Installation Instructions Technical Data Functionality PN IO Controller, PN IO Device, also simulteanously PN IO Specification V 2.3 PN IO Performance Class Class B (<= 1 ms) Processor 1.3 GHz Freescale PowerQUICC III Memory 1 GB DDR II 32 MB Flash Memory C-PCI Interface PCI Rev. 2.
