WD24HB2600
TABLE OF CONTENTS 1 Important Safety Instructions 2 2 Safety Information 3 3 4 Preparation What's Included 4 Front View 5 Rear View 6 Installing the Stand 7 Remote Control 8 Connecting External Devices 9 Initial Setup Navigating the Setup Settings APPS Media Viewing JPEG Viewing MJPEG Source Setup Settings Audio Picture Channel Time Lock Network 10 11 5 Customizing TV Settings 6 Parental Control 12 13 13 14 14 15 15 16 17 18 18 19 20 21 7 Troubleshooting 23 8 Maintaining 24 2
IMPORTANT SAFETY INSTRUCTIONS • Read these instructions – All the safety and operating instructions should be read before this product is operated. • Keep these instructions – The safety and operating instructions should be retained for future reference. • Heed all warnings – All warnings on the appliance and in the operating instructions should be adhered to. • Follow all instructions – All operating and use instructions should be followed.
SAFETY INFORMATION To ensure reliable and safe operation of this equipment, please carefully read all the instructions in this user guide, especially the safety information below. Electrical Safety • The TV set should only be connected to a main power supply with voltage that matches the label at the rear of the product. • To prevent overload, do not share the same power supply socket with too many other electronic components.
PREPARATION What's Included TV Set Remote Control with Batteries Four Screws (ST4x10 ) TV Stand User Manual User Manual En 4 Quick Connect Guide Warranty Card Quick Connect Guide Warranty Card
PREPARATION Front View 1. POWER Switch the TV between On / Standby mode. 2. SOURCE Press to select among different input signal sources. 3. MENU Display the main menu. 4. CH / Press to select a channel. 5. VOL -/+ Press to adjust the volume. 6. POWER Indicator Illuminate blue when the TV is turned on. Illuminate red when the TV is in standby mode. 7. IR (Infrared Receiver) Receive IR signals from the remote control.
PREPARATION Rear View 1. Power Cord Connect to AC power outlet. 2. Headphone Socket Connect to the Headphones. 3. USB Port Connect to a USB storage device to play compatible movie and photo 4. LAN Network connection port. 5. HDMI Input Connect to a (HD) signal input device. 6. VGA Input Connect to a computer or other devices with a VGA interface. 7. PC AUDIO Input Connect to a computer audio output. En 6 8. DTV/TV Input Connect to the antenna (75Ω VHF/UHF) socket with the RF coaxial cable. 9.
PREPARATION Installing the Stand • 1. Lay the TV face down on a flat, cushioned surface to avoid damaging or scratching. • 2. Fix the Left Connecting Base to the main unit using the 2 provided screws. (ST4x10 ) • 3.Fix the Right Connecting Base to the main unit using the 2 provided pcs provided screws. (ST4x10 ) Removing the Stand for Wall-Mounting • 1.Lay the TV face down on a flat, cushioned surface to avoid damaging or scratching. • 2.
PREPARATION Remote Control 1. HOME: Display t he Home menu. 2. POWER:Turn the LED TV on or off. 3. APPS:Press to select the desired APPS. :Display the main TV 4. menu. 5. :Return to previous menu button. 6. :Allows you to navigate the OSD menus and adjust the system settings to your preference. 7. OK:Confirm the selection in the OSD (on screen display). 8. INFO: Displays the current input source and the channel information. 9. E X I T/SORTIE: menu. 10.
CONNECTING EXTERNAL DEVICES Blu-ray Player / Recorder Game Console Satellite Video Camera Antenna Cable Digital Audio System Satellite Receiver VCR Composite/Component Cable (not included) Optical Cable (not included) AUDIO Audio Cable (not included) COMPONENT OR OPTICAL HDMI 3 RF Cable(not included) LAN HDMI 2 HDMI 1 VGA PC AUDIO VGA Cable 3.
CUSTOMIZING TV SETTINGS Initial Setup • Connect the power cord to the power socket after you have completed all the physical connections. At this stage, the TV will enter Standby Mode and the red LED indicator will illuminate. button on the main unit or on the remote control to • In Standby Mode, press the turn the TV on. The red LED indicator will turn blue. • The first time you turn the TV on, it will go into the Setup Wizard.
CUSTOMIZING TV SETTINGS 5 6 7 • If channels can not be found, this frame will be displayed automatically. Navigating the Setup Settings • Press the MENU button to display the main menu. • Use buttons to select setup menu and then press OK buttons to enter, then to navigate and select the available menu.
CUSTOMIZING TV SETTINGS APPS • Press the MENU button on the main unit or on the remote control to display the main menu. Then use to select the apps and press OK button to enter. Use to select the desired app. Or press the hotkey on the remote control to enter the APP directly. Note:After the TV connects to network, the status Unconnected will alter to Connected. NETFLIX YouTube VUDU Toongoggles Pandora AccuWeather En 12 Enjoys TV shows & movies streamed instantly over the Internet.
CUSTOMIZING TV SETTINGS MEDIA NOTE:Portable storage devices( USB disk or Hard disk) should be inserted. • Press the MENU button on the main unit or on the remote control to display the main menu. Then use to select the media and press OK button to enter. to select the desired option. Use Viewing JPEG • After entering MEDIA, press buttons to select JPEG and then select the / buttons to navigate in the picture folder disk type to enter.
CUSTOMIZING TV SETTINGS Viewing MJPEG buttons to select MJPEG and then select the • After entering MEDIA, press disk type to enter. Then use / buttons to navigate in the video folder and then select the desired video and press OK button, when √ appears on the top-left, press to play the video, or press menu button to display the control bar, then use to select Play to display the video. SOURCE VGA AV/YPBPR • Press the menu button on the main unit or on the remote control to display the main menu.
CUSTOMIZING TV SETTINGS SETUP • Press the menu button on the main unit or on the remote control to display the to select the setup and press OK button to enter. Use main menu. Then use to select the desired option. SETTING buttons to select SETTING menu and then press OK button to enter. • Press Press buttons to select the following setting options and then press buttons to adjust each option’s setting. Select menu language : English, Français or Español.
CUSTOMIZING TV SETTINGS CC Mode Select CC mode :CC On, CC Off. Basic Selection: CC1, CC2, CC3, CC4, Text1, Text2, Text3, Text4. Advanced Selection: Service1, Service2, Digital CC Service3, Service4, Service5, and Service6. Mode, Font Style, Font Size, Font Edge Option Style, Font Edge Color, FG Color, BG Color, FG Opacity, BG Opacity. Turn On or Off the Audio Only. Restore the TV to factory default settings.
CUSTOMIZING TV SETTINGS PICTURE • Press buttons to select PICTURE menu and then press OK button to enter. Press buttons to select the following picture options and then press buttons to adjust each option’s setting. Picture Mode Brightness Contrast Color Sharpness Hue Color Temp. Advanced Settings Cycle among picture mode: Energy Saving/User/Retail/ Movie. Increase or decrease the amount of white in the picture. (For User mode) Adjust the difference between light and dark levels in the pictures.
COSTOMIZING TV SETTINGS CHANNEL buttons to select CHANNEL menu and then press OK button to enter. • Press Press buttons to select the following channel options and then press buttons to adjust each option’s setting. Signal Type Auto Scan Favorite Channel List Show/Hide Channel Number Channel Label Select antenna between Air and Cable. Cable: Select your cable system from: Auto/STD/IRC/HRC. Auto Scan: Select the Auto Scan feature to scan your available cable channels.
CUSTOMIZING TV SETTINGS Sleep Timer Select a period of time after which the TV automatically switches to standby mode: Off/5/10/…/180/240 min. LOCK • Press buttons to select LOCK menu and then press OK button to enter. Use the 0-9 buttons to input 4-digit password to enter the LOCK menu. buttons to select the following lock options and then press • Press buttons to adjust each option’s setting. Note: the default password is “0000”.
COSTOMIZING TV SETTINGS NETWORK Network Settings Network Status Deactivate Netflix Deactivate • Press buttons to select NETWORK menu and then press OK button to buttons to select the following network options and then press enter. Press buttons to adjust each option’s setting. Network Settings Network Status Deactivate Netflix Deactivate Vudu ESN En 20 Select two types of network: Wireless Network or Wired Network. Show the network status. Deactivate Netflix and clear the account information.
PARENTAL CONTROL Press the MENU button on the main unit or on the remote control and then press buttons to select LOCK menu. Use the 0-9 buttons to input the 4-digit password to enter the LOCK menu. If used, this option feature can "block'' undesirable programming from appearing on the TV. Parental Control offers the user a wide variety of options and settings that restrict or "block'' the programming that can appear on the TV.
PARENTAL CONTROL • Motion Picture Association of America (MPAA) Rating System G PG Grade General Audiences Parental Guidance Suggested PG-13 Parents Strongly Cautioned R Restricted NC-17 X No Rating No children under age 17 Hard Core Films No Rating Meaning Content not offensive to most viewers. Content is such that parents may not want their children to view the program. Program is inappropriate for preteens, with a greater degree of offensive material suggested than a PG rated program.
TROUBLESHOOTING If your TV does not operate normally or cannot be turned on, please check the following troubleshooting questions. Remember also to check any other connected electronic device, such as DVD or Blu-ray player to pinpoint the problem. If the TV still fails to operate normally, please contact technical support. The TV does not operate properly The TV does not respond • The TV may freeze up during use. Disconnect the power when pressing any cord from the power socket for a few minutes.
TROUBLESHOOTING The audio function does not work • Press the VOL +/- buttons. • Sound muted? Press the MUTE button. Picture OK but no sound • Try another channel. The problem may be caused by the broadcaster. No output from one of the • Adjust the Balance settings in the AUDIO menu. speakers • A change in ambient humidity or temperature may result in Unusual sound from an unusual noise when the TV is switched on or off and does inside the TV not indicate a fault with the TV.
SPECIFICATION Panel Size Display Type Panel Technology Panel 60 Hz Vs. 120 Hz Display Resolution HDMI Support Panel Resolution Aspect Ratio Dynamic Contrast Ratio-Panel Response Time (G To G) Lamp Life (Typ. Hours) Horizontal Viewing Angle (At CR>10) Vertical Viewing Angle (At CR>10) Wall-mount(LxW-mm) 23.8inch diagonally DLED TFT 60 Hz 1366 x 768 1366 x 768 1366 x 768 16:9 800:1 8 ms 20,000 hours 178 178 200*200 VESA(mm) The FCC Wants You to Know THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
OTT APP SERVICE If you want to know about these APP information or get more service. Please refer to following content. • Netflix You can call the following telephone for more help: 866-579-7172 If your matter is regarding customer service, please refer to https://contactus.netflix.com/help for alternative contact information. • YouTube You can browse the following website for more help: https://productforums.google.
SE-UM-2401 -1601
