USER’S MANUAL MANUEL DE L’UTILISATEUR MANUAL DEL USUARIO WD55UT4490
CONTENTS Important Safety Instructions 2 Safety Information 3 Preparation 4 What's Included 4 Front View 5 Rear View 6 Installing the Stand 7 Removing the Stand for Wall-Mounting 7 Remote Control 8 Connecting External Devices 9 Customizing TV Settings 10 Initial Setup 10 Navigating the Setup Settings 11 Apps 12 Media 13 Viewing Photos 13 Playing Motion JPG 14 Source 14 Setup 15 System 15 Channel 17 Support 17 Lock 18 Picture 19 Network 20 Auto Upgrade 21 A
IMPORTANT SAFETY INSTRUCTIONS • Read these instructions – All the safety and operating instructions should be read before this product is operated. • Keep these instructions – The safety and operating instructions should be retained for future reference. • Heed all warnings – All warnings on the appliance and in the operating instructions should be adhered to. • Follow all instructions – All operating and use instructions should be followed.
SAFETY INFORMATION To ensure reliable and safe operation of this equipment, please carefully read all the instructions in this user guide, especially the safety information below. Electrical Safety • The TV set should only be connected to a main power supply with voltage that matches the label at the rear of the product. • To prevent overload, do not share the same power supply socket with too many other electronic components.
PREPARATION What's Included TV Set Remote Control with Batteries Six Screws TV Stand User Manual User Manual En 4 Quick Connect Guide Quick Connect Guide Warranty Card Warranty Card
PREPARATION Front View 1. POWER Switch the TV between On / Standby mode. 2. SOURCE Press to select among different input signal sources. 3. MENU Display the main menu. 4. CH / Press to select a channel. 5. VOL +/Press to adjust the volume. 6. POWER Indicator Illuminate blue when the TV is turned on. Illuminate red when the TV is in standby mode. 7. IR (Infrared Receiver) Receive IR signals from the remote control.
PREPARATION HDMI3 AUDIO 10 COMPONENT 900 Rear View OPTICAL LA N HDMI2 HDMI1 VG A PC AUDI O 1. Power Cord Connect to AC power outlet. 2. OPTICAL Output Connect a digital sound system to this jack. 3. USB Port Connect to a USB storage device to play compatible movie and photo files. 4. LAN Network connection port. 5. HDMI Input Connect to a High-Definition (HD) signal input device. 6. VGA Input Connect to a computer or other devices with a VGA interface. 7.
PREPARATION Installing the Stand • 1. Lay the TV face down on a flat, cushioned surface to avoid damaging or scratching. • 2. Fix the Left Connecting Base to the main unit using the 3 provided screws. • 3.Fix the Right Connecting Base to the main unit using the 3 provided pcs provided screws. Removing the Stand for Wall-Mounting • 1.Lay the TV face down on a flat, cushioned surface to avoid damaging or scratching. • 2.Untighten the 6 pcs screws holding the stand assembly and remove them. • 3.
PREPARATION Remote Control 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. 32. En 8 : Switch the TV between On and Standby mode. MUTE: Mute and restore TV sound. 0~9: Select a program.(ATV/DTV mode) : Enter multiple program channel number such as 2-1. : Return to the previous viewing channel. APP: Press to select the desired APP. MENU: Display the main menu.
CONNECTING EXTERNAL DEVICES En 9
CUSTOMIZING TV SETTINGS Initial Setup • Connect the power cord to the power socket after you have completed all the physical connections. At this stage, the TV will enter Standby Mode and the red LED indicator will illuminate. button on the main unit or on the remote control to • In Standby Mode, press the turn the TV on. The red LED indicator will turn blue. • The first time you turn the TV on, it will go into the Setup Wizard. Press buttons to select your desired mode and press OK to confirm.
CUSTOMIZING TV SETTINGS Navigating the Setup Settings • Press the MENU button to display the main menu. buttons to select Setup menu and then press • Use and select the available menu.
CUSTOMIZING TV SETTINGS Apps Toon Goggles VUDU • Press the MENU button on the main unit or on the remote control to display the to enter the streaming and use to select the desired Apps. Then press APP and press OK button to view. Or press the hotkey on the remote control to enter the APP directly. Netflix Pandora Toon Goggles Enjoys TV shows & movies streamed instantly over the Internet. Free personalized radio that offers effortless and endless music enjoyment and discovery.
CUSTOMIZING TV SETTINGS Media • Press the MENU button on the main unit or on the remote control, then press to select Media, and use to enter the media and use to select the desired option. NOTE:Portable storage devices( USB disk or Hard disk) should be inserted. Viewing Photos buttons to select Photos and then select the • After entering Media, press disk type to enter. Then use / buttons to navigate in the picture folder to select the desired photo, then a subscreen will pop up.
CUSTOMIZING TV SETTINGS Playing Motion JPG buttons to select Motion JPG and then select • After entering Media, press / buttons to navigate in the motion the disk type to enter. Then use JPG folder to select the desired video, then a subscreen will pop up. Press OK button, when √ appears on the top left, press to display the video. Note: File format supported: Motion JPG. Source • Press the MENU button on the main unit or on the remote control and press buttons to select the Source menu.
CUSTOMIZING TV SETTINGS Setup • Press the MENU button on the main unit or on the remote control to display the to select Setup menu and press to enter. main interface. Then press Then press to select the desired option. System Wide • Press buttons to select System menu and then press OK button to enter. buttons to select the following setting options and then press Press buttons to adjust each option’s setting.
CUSTOMIZING TV SETTINGS Menu Language Transparency Zoom Mode Noise Reduction Advanced Closed Caption Select menu language : English, Français or Español. The default on-screen menu language is English. Select to turn On/Off transparency function. Select zoom mode : Standard/Wide/Wide Zoom/Zoom. Note: Different input source, the zoom mode options may differ. Reduce the noise level of the connected device: Off/ Weak/Middle/Strong. Adjust advanced option’s setting: H-POS, V-POS, Clock, Phase or Auto.
COSTOMIZING TV SETTINGS Channel buttons to select Channel menu and then press OK button to enter. • Press buttons to select the following channel options and then press Press buttons to adjust each option’s setting. Air/Cable Auto Scan Show/Hide Channel Number Channel Label Signal Information Select antenna between Air and Cable. Select Auto Scan to search the available Air or Cable channels. Show/Hide the selected channel. Display the current channel number. Display the current channel label.
CUSTOMIZING TV SETTINGS Lock • Press buttons to select Lock menu and then press OK button to enter. Use the 0-9 buttons to input 4-digit password to enter the Lock menu. buttons to select the following lock options and then press • Press buttons to adjust each option’s setting. Note: the default password is “0000”. Change Password Lock System USA Canada RRT Setting Use 0-9 buttons to input the old password and then input the new 4-digit password. Re-enter new password for confirmation.
COSTOMIZING TV SETTINGS Picture U s er • Press buttons to select Picture menu and then press OK button to enter. buttons to select the following picture options and then press Press buttons to adjust each option’s setting. Picture Mode Blue Screen Brightness Contrast Color Sharpness Cycle among picture mode: Dynamic/Movie/Game Mode/User/Standard. Alternative: you may press the P.MODE button to select the picture mode directly.
CUSTOMIZING TV SETTINGS Network Network Type Wired Network Wired Network Wireless Network THTF4KOTT00000000000000000000 000100000001 • Press buttons to select Network menu and then press OK button to enter. buttons to select the following network options and then press Press buttons to adjust each option’s setting. Network Type Wired Network Wireless Network IP Address Network Upgrade Deactivate Netflix Deactivate Vudu Netflix ESN En 20 Select two types of network: Wireless Network or Wired Network.
COSTOMIZING TV SETTINGS Auto Upgrade • After the TV connects to network, the system will automatically detect software version. • If there is a new version, it will be downloaded in the background. When you want to enter the app, a menu bar will pop up reminding you that upgrade software is downloading. Please try later... New software is downloading,complete 1% yet and need about 86 minutes, please wait until the upgrade has completed.
CUSTOMIZING TV SETTINGS Reminder for internet connection: • Below occasions are possible while your internet is connected to enjoy your OTT services. • 1.Please check your internet signal strength while internet is connected, signal strength below 50 may result bad connection and non-smooth picture. • 2.To enter OTT services, 30 seconds may be required for internet connection. Recommended 10Mb above internet speed Audio • Press buttons to select Audio menu and then press OK button to enter.
PARENTAL CONTROL Press the MENU button on the main unit or on the remote control and then press buttons to select LOCK menu. Use the 0-9 buttons to input the 4-digit password to enter the LOCK menu. If used, this option feature can "block'' undesirable programming from appearing on the TV. Parental Control offers the user a wide variety of options and settings that restrict or "block'' the programming that can appear on the TV.
PARENTAL CONTROL • Motion Picture Association of America (MPAA) Rating System G PG Grade General Audiences Parental Guidance Suggested PG-13 Parents Strongly Cautioned R Restricted NC-17 X No Rating No children under age 17 Hard Core Films No Rating Meaning Content not offensive to most viewers. Content is such that parents may not want their children to view the program. Program is inappropriate for preteens, with a greater degree of offensive material suggested than a PG rated program.
TROUBLESHOOTING If your TV does not operate normally or cannot be turned on, please check the following troubleshooting questions. Remember also to check any other connected electronic device, such as DVD or Blu-ray player to pinpoint the problem. If the TV still fails to operate normally, please contact technical support. The TV does not operate properly The TV does not respond • The TV may freeze up during use. Disconnect the power when pressing any cord from the power socket for a few minutes.
The audio function does not work • Press the VOL +/- buttons. • Sound muted? Press the MUTE button. Picture OK but no sound • Try another channel. The problem may be caused by the broadcaster. No output from one of the • Adjust the Balance settings in the AUDIO menu. speakers • A change in ambient humidity or temperature may result in Unusual sound from an unusual noise when the TV is switched on or off and does inside the TV not indicate a fault with the TV.
SPECIFICATION Panel Size Display Type Panel Technology Panel 60 Hz Vs. 120 Hz Display Resolution HDMI Support Panel Resolution Aspect Ratio Dynamic Contrast Ratio-Panel Response Time (G To G) Lamp Life (Typ. Hours) Horizontal Viewing Angle (At CR>10) Vertical Viewing Angle (At CR>10) Wall-mount(LxW-mm) 54.
OTT APP SERVICE If you want to know about these APP information or get more service. Please refer to following content. • Netflix You can call the following telephone for more help: 866-579-7172 If your matter is regarding customer service, please refer to https://contactus.netflix.com/help for alternative contact information. • YouTube You can browse the following website for more help: https://productforums.google.
CONTENU CONTENTS Consignes de sécurité importantes 2 Renseignements sur la sécurité 3 Préparation 4 Éléments compris 4 Vue avant 5 Vue arrière 6 Installation du socle 7 Retrait du socle en vue d’un montage mural 7 Télécommande 8 Connexion des appareils externes 9 Personnalisation des paramètres du téléviseur 10 Configuration initiale 10 Navigation dans les paramètres de configuration 11 Apps 12 Médias 13 Visualisation de photos 13 Jouer Mouvement JPG 14 Source 14 Option
CONSIGNES DE SÉCURITÉ IMPORTANTES • • • • • • • • • • • • • • Lisez ces consignes – Avant d’utiliser ce produit, vous devez lire toutes les consignes liées à la sécurité et au fonctionnement de l’appareil. Conservez ces consignes – Nous vous conseillons de conserver les consignes liées à sécurité et au fonctionnement de l’appareil pour consultation future. Observez toutes les mises en garde –Vous devez suivre toutes les consignes liées au fonctionnement et à l’utilisation de l’appareil.
RENSEIGNEMENTS SUR LA SÉCURITÉ Pour vous assurer du fonctionnement fiable et sécuritaire de cet équipement, veuillez lire avec attention les consignes de ce guide d’utilisation, et plus particulièrement les renseignements ci-dessous portant sur la sécurité. Sécurité électrique • Le téléviseur ne doit être raccordé qu’à l’alimentation principale, à une tension correspondant à celle indiquée sur l’étiquette à l’arrière de l’appareil.
PRÉPARATION Éléments compris Télécommande et piles Poste de télévision Socle de télévision Manuel d’utilisation Manuel d’utilisation Fr 4 Six Vis Guide de Connexion Rapide Guide de Connexion Rapide Garantie Carte Garantie Carte
PRÉPARATION Vue avant 1. MISE SOUS TENSION Pour faire basculer le téléviseur entre les modes Sous tension et Veille. 2. SOURCE Appuyez sur cette touche pour choisir la source du signal d’entrée. 3. MENU Afficher le menu principal. 4. CH / Appuyez sur cette touche pour choisir un canal. 5. VOL +/Appuyez sur cette touche pour régler le volume. 6. Témoin de mise sous tension Apparaît en bleu lorsque le téléviseur est allumé. Apparaît en rouge lorsque le téléviseur est en mode veille. 7.
PRÉPARATION HDMI3 AUDIO 10 COMPONENT 900 Rear View OPTICAL LA N HDMI2 HDMI1 VG A PC AUDI O 1. Cordon d’alimentation Se branche dans une prise de courant c.a. 2. OPTIQUE Pour connecter un système de son numérique à cette prise. 3. Port USB Se raccorde à un dispositif de stockage USB afin de lire des fichiers de flim et de photos compatibles. 4. LAN Le port de connexion de réseau. 5. Entrées HDMI Se raccordent à un appareil avec signal de sortie haute définition (HD). 6.
PRÉPARATION Installation du socle • 1. Couchez le téléviseur face vers le bas sur une surface plate et coussinée pour éviter de l’endommager ou de rayer l’écran. • 2. Fixer le raccordement Base Gauche à l'unité principale à l'aide des 3 vis fournies. • 3.Fixer le droit Raccordement de base à l'unité principale en utilisant les 3 pièces fournies vis fournies. Retrait du socle en vue d’un montage mural • 1.
PRÉPARATION Remote Control 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. 32. Fr 8 : Pour basculer le téléviseur entre les modes Sous tension et Veille. MUSE: Pour activer ou désactiver le son du téléviseur. 0~9: Pour sélectionner un canal. (Mode ATV/ DTV) —: Pour entrer plusieurs numéros de canal, par exemple 2-1. : Pour revenir au canal précédent. APPS:Appuyez sur pour sélectionner l'APPS souhaitée.
CONNEXION DES APPAREILS EXTERNES Fr 9
PERSONNALISATION DES PARAMÈTRES DU TÉLÉVISEUR Configuration initiale • Une fois toutes les connexions physiques établies, branchez le cordon d’alimentation dans la prise de courant. À cette étape, le téléviseur passera en mode Veille et le témoin DEL rouge s’allumera. • Une fois sous ce mode, appuyez sur la touches de l’appareil ou de la télécommande pour allumer le téléviseur. Le témoin DEL rouge passera au bleu. • La première fois que vous allumez le téléviseur, l’assistant de configuration s’affiche.
