User's Manual
Table Of Contents
- 1. Legal Notices
- 2. Warranty
- 3. Security Summary
- 4. revision history
- 5. INTRODUCTION
- 6. Illustration of Fixture Parts
- 7. Safety Regulations
- 8. Fixture operating environment requirements
- 9. Operation Procedures
- 10. Software interface and error codes
- 11. maintenance
- 12. Consumable part list
- 13. SPARE part list
- 14. fixtures Dismantling and scrapping
KUNSHAN MYZY FIXTURE TECHNOLOGY CO.,LTD
7. SAFETY REGULATIONS
• The fixture to be operate by one person, the operator and all users must be trained
qualified to used the fixture.
•
Before start up, please ensure all the power cables are proper connection.
• Operators cannot leave the workplace at will.
• During operation process, if encountered the fixture abnormality, please press the
Emergency Stop Switch.
•
Do not simply change the relevant parameters of the fixture.
• Fixture maintenance needs to perform by skilled technicians, make ensure
main power-off and North Bar has cooled down before execute.
• Turn off the main power when not in use.
The following general safety precautions must be observed at all stages of operation,
service and maintenance of test fixtures. Failure to observe these precautions or the
specific warnings given elsewhere in this manual will violate safety standards in the
design, manufacture and testing of the fixtures for their intended use.
Myzy assumes no responsibility for the Customer's failure to comply with these
requirements.
#
NOTES
Fixture is equipped with an alarm alert feature that displays an alarm message on the touch
screen with a beep sound. Do not operate by unqualified or untrained personnel.
/18 31