User's Manual
Table Of Contents
- 1. Legal Notices
- 2. Warranty
- 3. Security Summary
- 4. revision history
- 5. INTRODUCTION
- 6. Illustration of Fixture Parts
- 7. Safety Regulations
- 8. Fixture operating environment requirements
- 9. Operation Procedures
- 10. Software interface and error codes
- 11. maintenance
- 12. Consumable part list
- 13. SPARE part list
- 14. fixtures Dismantling and scrapping
KUNSHAN MYZY FIXTURE TECHNOLOGY CO.,LTD
10.3 Keep warm interface!
When the North Bar and Hot Pocket heat up to a steady state, the timer starts counting
down. ( Note: Do not turn the knob at this time, otherwise an E01 error will be reported )
10.4 Completion Interface!
When the countdown is over the buzzer will be activated, indicating that the operator can
release the knob to start the disassembly screen. The fixture will display a 15mins
countdown to remind the operator to take out the hot pocket.( Note: If the operator has not
removed the Hot Pocket within 15min, the interface will report an E02 error. )
/27 31