BEDIENUNGSANWEISUNG mit Montageanweisungen Instructions for use and installation instructions Instructions d'utilisation et avis de montage Gebruiksaanwijzing en montagehandleiding Istruzioni di uso e di montaggio Instrucciones de uso y de montaje Instruções de uso e de montagem Ο∆ΗΓΙΕΣ ΧΡΗΣΗΣ ΚΑΙ ΣΥΝΑΡΜΟΛΟΓΗΣΗΣ EKI 607.2 / 807.2 / 848.
GB Disposing of the packaging For your information... Please ensure the environmentally-friendly disposal of the packaging that came with your appliance. Recycling the packaging material saves on resources and cuts down on waste. Please read this manual carefully before using your appliance. It contains important information on safety and on how to use and look after your appliance so that it will provide you with many years of reliable service.
Safety instructions Connection and operation Safety instructions • The appliances are constructed in accordance with the relevant safety regulations. • Connecting the appliance to the mains and repairing and servicing the appliance may only be carried out by a qualified electrician according to currently-valid safety regulations. For your own safety, do not allow anyone other than a qualified service technician to install, service or repair this appliance.
Appliance description GB A p p l i a n c e d e s c ri p ti o n 1. Induction cooking zone front left Operating the hob with the sensor keys 2. Induction cooking zone back left The ceramic glass hob is operated with touch control sensor keys. The sensor keys are operated as follows: lightly touch a symbol on the surface of the ceramic glass plate. A buzzer will indicate when the controls have been operated correctly. The touch control sensor key will then be indicated as “key”. 3.
Operation GB The hob Operating time limit The hob is equipped with an induction cooking mode. An induction coil underneath the glass ceramic hob generates an electromagnetic alternating field which penetrates the glass ceramic and induces the heat-generating current in the pot base.
Operation GB Cookware for induction hobs Cookware for induction cooking zones must be made of metal and have magnetic properties. The base must be sufficiently large. Only use pots with a base suitable for induction.
Operation GB Operating the keys The controls described here expect the pressing of a (selection) key to be followed by the pressing of a subsequent key. The next key will need to be pressed within 10 seconds, otherwise the selection will be deleted. The plus / minus keys can be touched individually or be permanently pressed. Switching on the hob and cooking zones 1. Press the ON key until the power setting displays indicate 0. A short signal will sound. The controls are ready for operation. 2.
Operation GB Locking The lock can be used to lock key operation and cooking level settings. Only the off key can be used to switch the hob off. Activating the lock (while cooking): 1. Press the Lock key to activate function. The control lamp above the lock key will light up. The controls are locked. Switching off the lock 2. Press the Lock key to activate function. The control lamp above the lock key will go off. Instructions • An activated lock will remain activated even if the hob is switched off.
Operation GB Automatic switch-off (timer) The automatic switch-off device is used to automatically switch off any cooking zone after a stipulated period of time. Cooking times ranging from 1 minute to 99 minutes can be set. 1. Switch on the hob. 2. Switch on one or more cooking zones and set the required power settings. 3. Press the Plus key and the Minus key on the timer simultaneously. The standby dot of the timer will light up.
Operation GB Automatic boost function Parboiling takes place at power level 9 with the automatic boost function. After a certain time the power level will switch down automatically to a lower simmering setting (1 to 8). When using the automatic boost function only the simmering setting with which the food is to be cooked through needs to be selected since the electronic unit switches down automatically.
Operation GB Power boost setting (cooking zones marked with a P) The power boost setting makes additional power available for induction cooking zones. A large quantity of water can be brought to the boil very quickly. The power boost setting operates for 10 minutes, after which the power level is automatically reduced to cooking level 9. once in order to activate the power boost set1. Press the power key ting. The control lamp above the key will blink. 2.
Cleaning and Care Cleaning and Care • Before cleaning, switch off the hob and let it cool down. • Never clean the glass ceramic hob with a steam cleaner or similar appliance! • When cleaning make sure that you only wipe lightly over the ON and the OFF key. The hob may otherwise be accidentally switched on! GB Specific soiling Heavy soiling and stains (limescaling and shiny, mother-ofpearl-type stains) can best be removed when the hob is still slightly warm. Use commercial cleaning agents to clean the hob.
What to do if trouble occurs What to do if trouble occurs Interference with and repairs to the appliance by unqualified persons are dangerous as they can result in an electric shock, or short circuit. Do no interfere with or try to repair the appliance; this could cause injury to persons and damage to the appliance. Therefore always have such work done by an expert, e.g. the technical Customer Service.
Instructions for assembly GB Note Installation The KÜPPERSBUSCH induction hob may only be built-in in accordance to the instructions included in this manual. In the case of failure to observe these instructions, KÜPPERSBUSCH shall decline any liability and the approved marks of conformity will become invalid! Important • Remove any transverse strips underneath the worktop at least in the area of the worktop cut-out. • Avoid excessive thermal development from below e.g.
Instructions for assembly GB Clips • Drive the clips into the worktop cut-out at the intervals indicated. It is not necessary to adjust the height due to the horizontal stop. • Important! The horizontal drive of the clips must be flush with the worktop (avoid the risk of fractures). • Position the hob according to the illustration on the left side (a), align it (b) and insert the clips (c). • Screws may be used to fasten the clips.
Instructions for assembly GB Electrical connection Technical data • The electrical connection must be carried out by a qualified electrician who is authorised to carry out such work! • Statutory regulations and the connection specifications issued by the local power supply company must be strictly observed. • When connecting the appliance it must be ensured that there is a device which makes it possible to disconnect it from the mains at all poles with a contact opening width of at least 3 mm.
Kuppersbusch USA 1883 Massaro Blvd.