BEDIENUNGSANWEISUNG mit Montageanweisungen Instructions for use and installation instructions Instructions d’utilisation et avis de montage Gebruiksaanwijzing en montagehandleiding Istruzioni di uso e di montaggio Instrucciones de uso y de montaje Instruções de uso e de montagem Ðtv³wuÒ xvÒvÒ ÊËw Ò´ÎËxÑÐÌгvÒvÒ 072594 L41 KGCT 907.
For your information Contents Please read the instructions in this booklet carefully as it contains important information concerning the safety, the installation, the use and the maintenance of your appliance. Your appliance at a glance. . . . . . . . . . . . . . . . . . . . . . . . 15 Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 The appliance should only be used for cooking in the household. Keep the operation instructions in a safe place.
Your appliance at a glance 1 Dual-circuit cooking zone Ø 230 mm, 2300 Watt; Ø 140 mm, 1000 Watt 2 Extend/retract sensor buttons cooking area 3 Sensor buttons grill area 4 Sensor cooking zones 5 Off-sensor 6 On-sensor (Stand-by-switch) KGCT 907.2E 7 Sensor-child proof lock (sensor-lock) 8 Cooking zones Ø 140 mm, 1200 Watt Ø 180 mm, 1800 Watt Ø 180 mm, 1800 Watt Ø 140 mm, 1200 Watt 9 Safety strip 10 Grill area ca.
Safety instructions Before first use for connection and function Remove packaging and moving parts. Before first use the cooking area should be cleaned with a damp cloth and a little washing-up liquid. ■ ■ The mains connection, maintenance and repair jobs should only be carried out by an authorised technician in accordance with the applicable safety standards. Work which has been improperly carried out can endanger your safety. The surfaces of heating- and cooking zones become hot during operation.
Extending and retracting cooking area The cooking setting The cooking area cannot be extended and retracted unless the appliance is switched on. You have 9 cooking settings available.Select the required cooking setting with the plus- or minus-sensor. It will be indicated in the display. If you touch the button king area is extended.
If the sensor of a rear cooking zone is touched when the cooking area is retracted, the symbol „ “ appears in the display and an acoustic signal is emitted. Cooking zone heating indicator As long as the cooking zone is still hot, an “H” will appear in the display when the cooking zone has been switched off. The automatic boost function All cooking zones are equipped with an automatic boost function. Maximum power is used for the boost. The time period of the boost depends on the selected cooking setting.
If no pan or an unsuitable pan is put onto the cooking zone, an underlined “U” is indicated. After 1 minutes the cooking zone automatically switches itself off. not been completely covered. F The outer cooking zone circuit can also be switched on and off when the pan-detection function is active. Switching off the pan recognition function (e.g.
Child proof lock (sensor-lock) Time limit function (holiday function) Operating the sensor-lock detains unauthorised persons from using the appliance. In order to activate this lock the cooking area has to be in operation. The appliance is equipped with an automatic time limit function. This function makes sure that the appliance is not in operation for a long time. The time period of the time limit depends on the selected cooking setting, eg.
Cleaning and care ■ ■ ■ ■ ■ Never use sharp or abrasive agents! It is sufficient to clean with a damp cloth and a little washing-up liquid after usage. Wipe dry. Incrustation due to boilied over foods are best presoftened with a wet cloth. Then remove them with a glass scraper. Sugar and melted plastic should be removed while the cooking area is still hot. Clean the glass-ceramic cooking area after every use.
When this point flashes it indicates that the saucepan sensor is defective. However, you can continue to use the cooking zone when the saucepan sensor is switched off. You should always give the data on the rating plate to your service centre in case you have enquiries or want to order spare parts. The rating plate is located underneath the cooking area. The rating label is located at the bottom side of the hob. It is also stuck onto the cover page of this operating manual. 22 KGCT 907.
Installation Installation in a fitted kitchen Be careful during fitting! Do not put or drop edged or pointed tools (screwdriver etc.) on the glass top! ■ Any cooker hoods or wall cupboards must have a vertical clearance of at least 650 mm from the hob unit. ■ The appliance must be installed absolutely horizontally. ■ The Küppersbusch built-in oven EEB 9800 / 9600 can be fitted underneath the zoom-cooking centre KGCT 907.2E.
Electrical connection The built-in cooking area must be connected to the mains supply by a qualified electrician who is authorized to carry out such work. ■ Both legal wiring regulations and the requirements of your local electricity supply board must be fully complied with. ■ When connecting the hob, a device must be provided which enables allpole disconnection of the hob from the supply with a gap construction of at least 3 mm.
