Manual
12
KE7200 Settings
All device settings are made in the menu Settings > Instrument Settings. The possible operat-
ing steps are displayed in the respective menu in the lower status line.
They are preset to empirical values; there is also a Reset to Factory Settings function if some-
thing does not work as intended when creating cable or wiring functions.
> Language: Either German (default) or English.
> Unit of Measure: m (meter) or ft (foot).
> Battery Type: The instrument can be powered by either regular or rechargeable batteries (see
“Initial Startup” on page 11). Since the voltage of rechargeable batteries is lower, the capacity
information can be switched between regular and rechargeable batteries here.
> Backlighting: Switch-on time after each key press in seconds. Set the time with the ▲ or ▼
button, select with SEL.
> Auto Power O: Time of automatic switch-o of the instrument after the last keystroke. Set
with button ▲ or ▼, select with SEL.
> Key Beep: On or O.
> Acoustic Signal: On or O. The acoustic signal is issued after the cable measurement.
> Contrast: LCD contrast setting. Set with ▲ or ▼, conrm with SEL.
> Reset to Factory Settings: This returns all settings to the factory default values.
> Program Update: You can updated the rmware/software of your KE7200.
All data are deleted during an
update!
The rmware/software depends on your in-
strument. The table at
https://www.kurthelectronic.de/
ke7200-downloads/?lang=en
indicates which rmware/software you need
for your KE7200 and lets you contact our
support for the needed update le.
To perform the instrument update, you need
the update le (.upd) and the KE7200 Man-
ager PC software (for more information on
the KE7200 Manager, see page 22).
Connect the KE7200 to the PC,
then start the KE7200 Manager there, and
select the Update KE7200 tab. Select the
.upd le to be installed in the dialog, and
click on Open.
You will now be guided through the process
with the Update Information window. In the
KE7200, select Settings > Device Settings
> Program Update.
Then press the LEFT ◄ and RIGHT ►
keys simultaneously.
The update process will then start. After
approx. 1 minute, the update process will nish and the KE7200 will switch o.