Instruction Manual

PAGE
2
STEP 3 Thread the jam nut with right hand threads to
opposite end of adapter until loosely seated
against stop. PIC 2
STEP 4 Thread mirror and adapter assembly to the
stock mirror mounting point on right side of
bike until loosely seated. Back (unthread) the
assembly out to the desired vision position.
STEP 5 Thread the jam nut down the adapter to the
stock mirror mounting point. Finger tighten.
PIC 3
STEP 6 Holding the adapter with a wrench in adjusted position, tighten jam nut to the stock mirror
mounting point.
STEP 7 Tighten all fasteners.
STEP 8 Repeat for the other side.
ATTENTION!
It is the installer’s responsibility to ensure that all of the fasteners (including
pre-assembled) are tightened before operation of the motorcycle. Küryakyn will not
issue a warranty on components lost due to improper installation. Periodic maintenance
may be required.
Ride On!
Universal Mirror Adapter INSTALLATION
Adapter
Jam Nut
PIC. 2
PIC. 3
Jam Nut