User Manual

PAGE 2
301693-1215
TECH-CONNECT DEVICE HOLDER 1693
866 277 9598 | [e-mail]
454 COUNTY ROAD VV SOMERSET, WI 54025
KURYAKYN.COM
INSTALLATION INSTRUCTIONS
-CONTINUED-
STEP 3
Attach the Tech-Connect Device holder to the large chrome Accessory
Mount Plate (Premium-XL Chrome Mount) by inserting one of the included
#8 Phillips head screws and washers through a slot on each side of the Plate
and threading them into the back of the Tech-Connect Device Holder. PIC 2 and
PIC 3 Tighten securely.
PIC.2
STEP 4
Attach the Tech-Connect Device Holder to the black plastic Accessory Mount
Plate (Standard or Premium Chrome) by inserting one of the included #8
Phillips head screws and washers through the top and bottom slots on the Plate
and threading them into the back of the Tech-Connect Device Holder. PIC 4
Tighten securely.
PIC.3
TO PREVENT POSSIBLE LOSS OF CONTROL, WHICH COULD RESULT IN SERIOUS
INJURY OR DEATH, WE DO NOT RECOMMEND REMOVING, REPLACING OR OPER-
ATING THE DEVICE IN THE TECH-CONNECT WHILE RIDING THE MOTORCYCLE .
PIC.4
IT IS THE INSTALLER’S RESPONSIBILITY TO ENSURE THAT ALL OF THE FASTENERS
(INCLUDING PRE-ASSEMBLED) ARE TIGHTENED BEFORE OPERATION OF THE
MOTORCYCLE. KURYAKYN WILL NOT ISSUE A WARRANTY ON COMPONENTS LOST
DUE TO IMPROPER INSTALLATION. PERIODIC MAINTENANCE MAY BE REQUIRED.