User Manual

PAGE

TEST FIT:

STEP 3 Position the Left Saddlebag Harpoon Accent as shown

in PIC 2. Use masking tape to make alignment

marks; remove the Accent.

INSTALL:

STEP 4 Use your fingernail to rub the adhesive backing; this will activate the adhesive. Remove and dis-

card the backing.

STEP 5 Using the marks made in STEP 3, align the Left Accent and press it into place for one minute;

full bonding will occur after 24 hours. Remove and discard the masking tape.

STEP 6 Repeat STEPS 3 through 5 for the other side.

SADDLEBAG HARPOON ACCENTS

INSTALLATION

CLUTCH-SIDE (LEFT)

PIC 2

Ride On!

If operating the motorcycle before the 24 hour curing process has elapsed

then, secure the Accents with a high quality painter’s/masking tape.