Installation Manual

I N S TA L L AT I O N
CUSTOMER SERVICE
877.370.3604 (toll free)
INSTALLATION QUESTIONS
[e-mail]
or call 715.247.2983
LIMITED WARRANTY
Küryakyn warrants that any Küryakyn products sold
hereunder, shall be free of defects in materials and
workmanship for a period of one (1) year from the
date of purchase by the consumer excepting the
following provisions:
• Küryakyn shall have no obligation in the event
the customer is unable to provide a receipt showing
the date the customer purchased the product(s).
• The product must be properly installed,
maintained and operated under normal conditions.
• Küryakyn makes no warranty, expressed or
implied, with respect to any gold plated products.
• Küryakyn shall not be liable for any consequential
and incidental damages, including labor and
paint, resulting from failure of a Küryakyn product,
failure to deliver, delay in delivery, delivery in
nonconforming condition, or for any breech of con-
tract or duty between Küryakyn and a customer.
• Küryakyn products are often intended for use
in specific applications. Küryakyn makes no
warranty if a Küryakyn product is used in
applications other than intended.
• Küryakyn electrical products are warranted for
one (1) year from the date of purchase by the con-
sumer. Components of Küryakyn products containing
L.E.D.s will be warranted for defects in materials and
workmanship for 3 years from the date of purchase.
• Küryakyn makes no warranty of any kind in
regard to other manufacturer’s products distributed
by Küryakyn. Küryakyn will pass on all warranties
made by the manufacturer and where possible, will
expedite the claim on behalf of the customer,
but ultimately, responsibility for disposition of the
warranty claim lies with the manufacturer.
ABOUT OUR CATALOG
You’ll find all our innovations for H-D, GL and
Metric Cruisers in our annual catalogs. Order
online today–select the ”CATALOGS” icon. Each
Küryakyn
®
product comes with a Proof-of-Purchase
good for a complimentary catalog.
Details in packaging.
Be sure to ask your local dealer about other
Küryakyn
®
products, the motorcycle parts and
accessories designed for riders by riders.
©2005 Küryakyn USA
®
All Rights reserved.
PARTS INCLUDED
1 Right Air Deflector Accent
1 Left Air Deflector Accent
1 Alcohol Pad
1 Installation Instructions
Please read and understand entire instructions before starting installation.
ThANk YOU fOR ChOOSING küRYAkYN!
IN ORDER TO PROTECT YOU AND OThERS fROM POSSIBLE INjURY
AND/OR PROPERTY DAMAGE OR LOSS, PLEASE PAY CLOSE ATTENTION
TO ALL INSTRUCTIONS, WARNINGS, CAUTIONS AND ATTENTION NOTES
REGARDING ThE USE AND CARE Of ThIS PRODUCT.
ATTENTION! This indication alerts you to the fact that ignoring the contents described herein
may negatively affect product performance and functionality.
STRICTLY OBSERVE ThE fOLLOWING GUIDELINES IN ORDER TO USE ThE
PRODUCT PROPERLY AND AVOID POTENTIALLY DANGEROUS ACCIDENTS.
PROCEDURE
STEP 1 Read and understand all steps in the instructions before starting the installation. Park
the motorcycle on a hard, level surface; turn off the ignition and allow the engine to cool.
STEP 2 Without removing the adhesive backing, carefully test fit the accent to the left and
right air deflector. Make detailed notes or temporary reference marks regarding placement of
the accent.
ATTENTION! Ensure the area of installation is free of grease, oil, dirt or other debris to
ensure proper adhesion. Küryakyn WILL NOT warranty any parts lost due to
improper installation.
STEP 3 Clean the mounting area of both the left and right air deflector thoroughly with mild
soap and water and let the area dry completely. Once the area is dry, use the supplied alcohol
pad to ensure a clean surface.
NOTE Cleaning with the alcohol pad alone is not sufficient enough to ensure correct
adhesive bonding of the accent
STEP 4 Rub the adhesive backing on the accent to activate the adhesive.
STEP 5 Remove the adhesive backing and apply the accents to the deflectors in the
area decided in STEP 2.
ATTENTION! The adhesive will not bond correctly if applied at temperatures less than 50°F.
Do not attempt this installation in temperatures less than 50°F.
fITS: ’09-UP fLhTCU, fLhTCUSE & ANY OThER ’09-UP TOURING MODEL EQUIPPED
WITh h-D MID-fRAME AIR DEfLECTORS (h-D P/N 58002-09)
8674-11HD-0209
ACCENTS fOR h-D MID-fRAME AIR DEfLECTORS 8 6 7 4