Instruction Manual

PAGE
3
STEP 8 After the hoses are fit, use the included zip ties to help secure
the breather hoses to the hose fittings and the breather bolts.
STEP 9 Completely disassemble the Velociraptor Assembly. Make note
as to how it is assembled, it will help for reassembly. FIG 1
STEP 10 Locate the velocity stack (chrome cone) from the Velociraptor
Assembly. Insert the three 1/4”–20 socket head cap screws
through the mounting holes in the chrome cone from the
inside. Place one of the included non-adhesive backed gaskets
over the three mounting screws now protruding from the back
of the chrome cone. DO NOT place a bolt through the float
bowl vent hole - this hole is the one in the 10-o’clock position.
STEP 11 With the adhesive backed gasket in place between the breather adapter and the
throttle body—at this time you should have two gaskets installed, one
directly behind the chrome cone and one between the breather
adapter/throttle body—secure the assembly to the carburetor. DO NOT over
tighten the fasteners; the aluminum will strip easily.
STEP 12 Snap the black Super Ring into place on the installed Velociraptor. Ensure it is
securely snapped into place before continuing with the installation. PIC 3.
STEP 11 Place the filter into the Velociraptor, secure with the chrome Steel Mesh and the
Outer Ring. Line up the holes in the Mesh with those of the Outer Ring, secure with five
1/4”-20 x 1/2” Socket Head Cap Screws.
STEP 13 Double check the tightness of all related fasteners, check for hose clearance and check
throttle for correct operation, making sure it returns properly, before starting bike.
ROTATE THROTTLE AND CHECK THAT IT MOVES FREELY AND RETURNS
TO CLOSED BEFORE STARTING BIKE. FAILURE OF THE THROTTLE TO
RETURN COULD RESULT IN LOSS OF CONTROL CAUSING SERIOUS
INJURY OR DEATH.
It is the installer’s responsibility to ensure that all of the fasteners (including
pre-assembled) are tightened before operation of the motorcycle. Küryakyn will
not provide warranty coverage on products or components lost due to improper
installation or lack of maintenance. Periodic inspection and maintenance are
required on all fasteners.
Ride On!
VELOCIRAPTOR AIR CLEANER INSTALLATION
FIG 1
CHROME CONE
SUPER RING
FILTER ELEMENT
MESH SCREEN
OUTER TRIM RING
PIC 3
SUPER RING