User Manual

Multi Edit Mode
Zone Parameters
8-6
Zone Parameters
Each of the four Zones in a Multi has multiple parameters that determine its behavior. Since
the Zones of a Multi are independent of each other, changing a parameter for a certain
Zone will not affect the parameters of any other Zone.
The Zone parameters for each page are explained in detail below.
MAIN Page
Parameter Range Of Values Default Value
Program Program List 1 Concert Piano
MIDI Channel 1 to 16 1
Destination Local, MIDI, Local+MIDI Local+MIDI
Zone Status Active, Muted Active
Entry Volume None, 0 to 127 127
Entry Pan None, 0 to 127 64
Aux Send Level 0 to 127 10
Program
The Program parameter determines the Program to be loaded for the currently selected
Zone. You can set this parameter to any Artis Program (1 – 512). The display shows the
Program number and name.
The Value Jump double button press (Previous and Next buttons) jumps to selecting the
rst Program of each Category, as well as the Category Default Program of each Category
(if a Category Default Program has been set).
Editing this parameter also changes the MIDI Bank and MIDI Program parameters,
described later.