User's Manual

page 13
Settings, con’t
Disabled, 15 min, 30 min, 1 hour, 2 hours or 4 hours. The default value is 30 min. Pressing the Prev- /Next+ but-
ton pair will reset to default.
Hard Reset (Restoring Factory Defaults)
This function resets the Andante CUP110 to the original factory default settings. All user changes, saved Fa-
vorites, and user recorded songs are erased. This action cannot be undone.
1. Press the Settings button until the display reads HARD RESET?.
2. To perform the Hard Reset function press the Next+ button once.
3. The display now reads CONFIRM?
4. Press the Next+ button again conrm and to reset the CUP110. The unit will then erase its user
memory, restore all factory settings and reboot.
If you want to cancel the Hard Reset and remain in Settings Mode, press the Prev- button to conrm.
Press any other button to exit Settings Mode.
There is an alternate method for a Hard Reset on your Andante CUP110:
1. Hold the C8 key down while switching on the power.
2. Continue to hold C8 down until you see “RESETTING” (scrolling) in the display then release.
OS/Objects Version
To check for possible updates to your operating system in Settings Mode press the Settings button until OSis
displayed. This will display the current operating software and objects version.
The display rst shows the OS version, then the Object version. Visit the Kurzweil website (www.kurzweil.com) to verify
that your CUP110 has the latest versions. These are located under the Downloads tab for the CUP110. Complete
installation instructions are included in the downloaded les. A standard USB cable will be required for this operation.