User's Manual
Table Of Contents
- Kurzweil International Contacts
- Table of Contents
- Introducing Forte SE
- Getting Started
- Features of the Forte SE
- Terminology
- The Operating Modes
- Program Mode
- Program Edit Mode
- About Program Edit Mode
- Differences Between Regular and Advanced User Type
- Selecting Parameters
- VAST and KB3 Programs
- VAST Program Structure
- Editing VAST Programs
- The Parameters (PARAMS) Page
- The Program FX (FX) Page
- The Layer FX (LYR_FX) Page
- The COMMON Page
- The KEYMAP Page
- The LAYER Page
- The PITCH Page
- The AMP Page
- The Algorithm (ALG) Page
- The DSP Control (DSPCTL) Page
- The DSP Modulation (DSPMOD) Page
- The OUTPUT Page
- The LFO Page
- The ASR Page
- The Function (FUN) Page
- The Amplitude Envelope (AMPENV) Page
- The Envelope 2 (ENV2) and Envelope 3 (ENV3) Pages
- The Envelope Control (ENVCTL) Page
- The Arpeggiator Function
- The Utility Soft Buttons, HELP Soft Button and Favorites Buttons Functions
- Editing VAST Programs With KVA Oscillators
- KB3 Program Structure
- Editing KB3 Programs
- KB3 Editor: The Parameters (PARAMS) Page
- KB3 Editor: The Program FX (FX) Page
- KB3 Editor: The COMMON Page
- KB3 Editor: The Tone Wheels (TONEWL) Page
- KB3 Editor: The Drawbars (DRAWBR) Page
- KB3 Editor: The PITCH Page
- KB3 Editor: The AMP Page
- KB3 Editor: The KEYCLICK Page
- KB3 Editor: The PERC1 Page
- KB3 Editor: The PERC2 Page
- KB3 Editor: The EQ Page
- KB3 Editor: The OUTPUT Page
- KB3 Editor: The LFO, ASR, FUN, and ARP Pages
- The Effects Chain Editor
- Keymap and Sample Editing
- Multi Mode
- Multi Edit Mode
- About Multi Edit Mode
- Selecting Parameters
- Zone Parameters
- OVERVIEW Page
- MAIN Page
- KEYVEL (KeyVelocity) Page
- BEND Page
- CCTLS (CCs/Continuous Controllers) Page
- SWITCH (Switches) Page
- Controlling Program Parameter Assignments from Multi Mode
- The Controller Destination List
- COMMON Page
- ARP1 and ARP2 (Arpeggiator 1 & 2) Pages
- FX Page
- AUXFX 1, AUXFX 2
- About Auxiliary Effects
- Audio Input (AUD-IN)
- The Utility Soft Buttons, HELP Soft Button and Favorites Buttons Functions
- Save User Multis
- Global Mode
- Song Mode and the Song Editor
- Getting Started with the Sequencer
- Song Mode: The MAIN Page
- Song Mode: The BIG Page
- Song Mode: The FX Pages
- Song Mode: The MIXER Page
- Song Mode: The METRONOME Page
- Song Mode: The Filter Pages (RECFLT and PLYFLT)
- Song Mode: The MISC Page
- Song Mode: The STATS Page
- The Song Editor
- Song Editor: The COMMON Page
- Song Editor: The TRACK Page
- Song Editor: Track Functions
- Song Editor: The EVENT Page
- System Mode
- Troubleshooting
- MIDI Implementation
- Physical Specifications
- Programs
- KB3 Programs
- Multis
- Effects Chains
- Index
The Effects Chain Editor
Effects Parameters
8-17
Min Freq and Max Freq are the low and high limits of the resonant frequency as the lter is
swept. You can set the Min Freq higher than the Max Freq, in which case the lter will sweep
“upside down” relative to the controlling clock. e range for both is 16 to 8372 Hz.
LFO Shape is the waveform type for the LFO. Choices are Sine, Saw+, Saw-, Pulse, and Tri.
LFO PlsWid (Pulse Width). When the LFO Shape is set to Pulse, this sets the pulse width
as a percentage of the waveform period. When the width is set to 50%, the result is a square
wave. is parameter has no eect if other waveform types are chosen. Range is 0 to 100%.
LFO Smooth smooths (removes the higher harmonics from) the Saw+, Saw-, and Pulse
waveforms. A Sawtooth wave becomes more like a triangle wave, and a Pulse wave becomes
more like a sine wave. Range is 0 to 100%.
Distortion
Distortion eects on the Forte SE may also include a parametric equalizer or a cabinet
simulator.
Dist Drive applies a boost to the input signal to overdrive the distortion eect into soft
clipping. is will tend to make the signal very loud, so you may have to reduce the Out
Gain as this parameter is increased. Range is 0 to 96 dB.
Warmth is a lowpass lter in the distortion control path. is lter may be used to reduce
some of the harshness of some distortion settings without reducing the bandwidth of the
signal. Range is 16 to 25088 Hz.
Highpass allows you to reduce the bass content of the distortion content in the smaller
distortion eects that don’t have true parametric EQ. Range is 16 to 25088 Hz.
Cab Preset selects from eight cabinet simulations which have been created based on
measurements of real guitar amplier cabinets. e presets are: Basic, Lead 12, 2x12, Open
12, Open 10, 4x12, Hot 2x12, and Hot 12.
Cab Bypass switches on and o the cabinet-simulation part of the eect. When this is set to
“In”, the cabinet simulation is active; when it is “Out”, there is no cabinet action.
Cabinet HP and Cabinet LP are highpass and lowpass lters to set the frequency response
limits of the cabinets. Range of both lters is 16 to 25088 Hz.
Polydistort
is is a more complex distortion eect that provides two, four, or six stages of distortion.
Curve n controls the curvature of the individual distortion stages. 0% is no curvature (no
distortion at all). At 100%, the curve bends over smoothly and becomes perfectly at right
before it goes into clipping. Maximum value is 127%.