User's Manual

Program Mode
Save User Programs
6-15
To change the ID number, turn the Alpha Wheel or use the Previous-/Next+ buttons to
select the new ID number. To organize Programs by Category, press a Category button to
select the rst ID of the Category, then press the Program/Multi 1-16 buttons to select an
ID in the selected Category. If the Global Mode Sound Sel parameter is set to “ID number”,
the Program/Multi 1-16 buttons will instead allow you to select any user ID by typing
the number followed by pressing the Enter button. If you select a previously used ID# the
display will show a prompt to allow you to decide whether to replace it.
Naming a User Program
To rename the Program, rst press the Rename soft button. You will see the following in the
display:
e display shows the current Program name. Program names can total 16 characters in
length. To enter the new Program name you may use the letters and numbers printed on the
Program/Multi buttons, or use the Alpha wheel or Previous-/Next+ buttons to cycle through
the alphabet.
Press the center soft buttons (<<< and >>>) or the navigation buttons to move the cursor.
e Insert soft button will insert a blank space (the selected character and all characters to
the right will move one space to the right), and the Delete button will delete the current
character (all the characters to the right will move one space to the left).
When you are satised with your name, press the OK soft button to return to the Save
screen.