MPG100_Manual_G03_161009.
MPG100_Manual_G03_161009.ai 2 2016/10/9 16:17:35 INFORMATION FOR YOUR SAFETY! THE FCC REGULATION WARNING (for USA) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
MPG100_Manual_G03_161009.ai 3 2016/10/9 16:17:36 Contents Panel & Display Description Front Pane ........................................................................4 LCD....................................................................................4 Rear Panel.........................................................................5 Pedal..................................................................................5 Adjusting the Master Volume........................................
MPG100_Manual_G03_161009.ai 4 2016/10/9 16:17:36 Panel & Display Description Front Panel 3 4 5 6 7 8 9 12 13 14 15 16 17 18 11 10 20 1 2 1. [VOLUME] knob Adjust master volume 2. [BRILLIANCE] knob Adjust the brilliance 9. [ACCOMP] button Adjust the ACCOMP volume 10. [MELODY OFF] button Turn off the right-hand melody 11. [FREEZE] button Freeze the style parameter. C M Y CM MY 17. [CHORD MODE] button Enter the chord mode 19.
MPG100_Manual_G03_161009.ai 5 2016/10/9 16:17:36 Panel & Display Description Rear Panel 21 22 25 23 27 26 24 28 37 29 38 30 39 31 40 32 41 33 42 34 43 35 36 44 45 24. Data dial Adjust the value When [SHIFT] button released 21. [STYLE] button Enter style mode When [SHIFT] button pressed 21. [DEMO] button Enter demo mode 22. [VOICE] button Enter voice mode 22. [PERFORM] button Enter the Performance Assistant mode 23. [SONG] button Enter song mode and play songs 23.
MPG100_Manual_G03_161009.ai 6 2016/10/9 16:17:36 Setup Setup Guide In addition to the main piano cabinet, your instrument should come with the parts shown below. It requires three persons to complete the assembly, as the piano cabinet must first rest on the floor with support. Then the entire instrument must be lifted once the legs are securely attached. 1 7 6 C 8 M Y CM 5 MY CY 2 CMY K 4 NO.
MPG100_Manual_G03_161009.ai 7 2016/10/9 16:17:37 Setup STEP 1: A) Place piano cabinet ① and legs ② on a carpeted floor or blanket. Tilt the cabinet so that the underside is accessible. B) Align each of the 3 legs ② to the foot holes, as shown, using the hexagon wrench provided to secure each leg with 4 bolts and washer ⑥ ⑦ ⑧. Be sure to tighten all screws.
MPG100_Manual_G03_161009.ai 8 2016/10/9 16:17:38 Setup STEP 3: Place one end of the pedal support rods ④ into the rear of the pedalbox, then line up the other end of the rod to the rod holes on the underside of the main cabinet. Use the 8 screws ⑤ provided to secure the rods. STEP 4: Move the piano into an upright position. Three persons, one near each leg, lift the piano body straight upward with legs parallel to the floor. Then tilt backward until all 3 legs are vertical.
MPG100_Manual_G03_161009.ai 9 2016/10/9 16:17:39 Connections Connecting a pair of Headphones A standard pair of stereo headphones can be plugged in here for private practice or late-night playing. Jack1: when a pair of headphones is plugged into the jack 1, the sound can be heard from both headphones and speakers. Jack2: when a pair of headphones is plugged into the jack 2, the internal stereo speaker system is automatically shut off. The sound can only be heard from headphones.
MPG100_Manual_G03_161009.ai 10 2016/10/9 16:17:39 Adjusting the Master Volume Please rotate the [VOLUME] knob clockwise to increase the master volume or anticlockwise to decrease it. You can use the knob to set the desired volume level. Adjusting the Brilliance C Rotate the [BRILLIANCE] knob clockwise to make the instrument sound brighter, or anticlockwise to make it sound mellow. You can use the knob to set the desired brilliance level.
MPG100_Manual_G03_161009.ai 11 2016/10/9 16:17:39 Playing Voices The instrument features a variety of exceptionally realistic voices. Please refer to the Voice List. Playing a Voice 1. In standby mode, press [VOICE] button or one of the voice select buttons to enter the voice mode. LCD will display “VOICE R1” and the current voice name and number. 2. Use the data dial, [+/YES]/ [-/NO] button to select a voice you want to play. You can also use the voice select buttons to select a preset voice. 3.
MPG100_Manual_G03_161009.ai 12 2016/10/9 16:17:40 Playing Voices Touch Response The touch response feature allows you to dynamically and expressively control the voice level with your playing strength, just as on an acoustic instrument. The instrument provides 3 touch response curves. You can choose the most suitable one for your playing. Selecting OFF will result in a fixed volume level, no matter how hard or how soft you play the keys. 1.
MPG100_Manual_G03_161009.ai 13 2016/10/9 16:17:40 Playing Voices Notes: 1. The metronome sound will start from the next beat if it is turned on when the accompaniment is playing. 2. When the metronome is on, then start the accompaniment, the metronome will match the beats of the accompaniment. 3. In recording, the metronome sound cannot be recorded. Twinova The twinova mode splits the keyboard into two independent areas, which have the same pitch and voice, for the convenience of one-toone teaching. 1.
MPG100_Manual_G03_161009.ai 14 2016/10/9 16:17:40 Auto Accompaniment The auto accompaniment feature puts a full backing band at your fingertips. To use it, all you have to do is to play the chords with your left hand using your selected accompaniment style, and then the accompaniment will automatically play along, instantly following the chords you play. With auto accompaniment, even a solo performer can enjoy playing with the backing of an entire band or orchestra.
MPG100_Manual_G03_161009.ai 15 2016/10/9 16:17:40 Auto Accompaniment FILL IN Section Auto fill in function automatically adds a fill to your performance. When the fill-in is finished, accompaniment shifts to the Main section (A, B,). ENDING Section Ending is the ending section of the song. When the ending is finished, accompaniment automatically stops. The length of the ending differs depending on the selected style.
MPG100_Manual_G03_161009.ai 16 2016/10/9 16:17:41 Auto Accompaniment Chord Fingering How the chords are played or indicated with your left hand (in the auto accompaniment section of the keyboard) is referred to as "fingering". There are 2 types of fingerings as described below. Chord Basics A chord, in music, is any harmonic set of three or more notes that is heard as if sounding simultaneously. The most frequently encountered chords are triads.
MPG100_Manual_G03_161009.ai 17 2016/10/9 16:17:41 Auto Accompaniment Adjusting the Tempo Each style of the instrument has been set with a default or standard tempo; however, this can be changed by using the [TEMPO +]/ [TEMPO -] button. 1. Use the [TEMPO +]/ [TEMPO -] button to change the tempo. When the tempo value is flashing, you can also use the data dial to make a quick change in the value. 2. Press the [TEMPO+] and [TEMPO-] buttons simultaneously to restore the default tempo setting.
MPG100_Manual_G03_161009.ai 18 2016/10/9 16:17:41 Harmony The harmony function will automatically add harmony effect to the notes you play in the right hand area, instantly enriching your performance with a more harmonic expression. Harmony Switch 1. Press [HARMONY] button. The LCD displays “OFF”, which indicates the harmony effect is turned off now. 2. Press the [HARMONY] button again. The LCD now displays “Duet”, which indicates the harmony effect is turned on, and the type is Duet. 3.
MPG100_Manual_G03_161009.ai 19 2016/10/9 16:17:41 Performance Assistant Performance assistant is an easy-to-use function that makes your playing become more interesting. It provides many beautiful phrases to help you play your familiar instrument voice on the keyboard with ease. There are 2 voices you can select to play in Performance Assistant: Guitar and Piano. Enter the Performance Assistant 1. Holding down [SHIFT] button, and then press [PERFROM] button to enter the performance assistant mode.
MPG100_Manual_G03_161009.ai 20 2016/10/9 16:17:41 Performance Assistant Play a broken chord in the sub area 1. When the chord name is on display, press a white key in the sub area 1, a wonderful broken chord phrase will start. Press the other white keys to play a different type of phrase. Change the chord with your left hand; you will hear the broken chord phrase has a little bit change. Play a free solo in the sub area 2.
MPG100_Manual_G03_161009.ai 21 2016/10/9 16:17:42 DSP With the built in digital effects, you can add ambiance and depth to your music in a variety of ways. 1. The DSP effect is set to ON by default. The chorus and reverb level can be adjusted in the function menu. 2. Holding down [SHIFT] button, and then press the [DSP] button to turn DSP effect on or off. Note: There may be a slight break or noise if you switch on/off the DSP when style or song is playing. This is normal and need not panic.
MPG100_Manual_G03_161009.ai 22 2016/10/9 16:17:42 Pedal Function The Soft pedal can be assigned with different pedal function. Please refer to the “Pedal Type” in “Function menu” for details. 1. Soft Pedal (Pedel Soft) When you step on the soft pedal, all notes played on the keyboard will have a softer effect. 2. Pedal Start/Stop(Pedal St/T) If the pedal is assigned as “Pedal St/T”, the pedal will have the same function as [START/STOP] button. 3.
MPG100_Manual_G03_161009.ai 23 2016/10/9 16:17:42 Function Menu Holding down [SHIFT] button, and then press [FUNCTION+]/[FUNCTION-] button to enter function menu. The LCD displays the current function menu option. Use [+/YES]/ [-/NO] or data dial to set the parameters of the current option. The option and parameters are as follows: C M Y CM No.
MPG100_Manual_G03_161009.ai 24 2016/10/9 16:17:42 Function Menu Beat Type 1. Holding down [SHIFT] button, and then press [FUNCTION+]/ [FUNCTION-] button to select beat type menu. LCD displays “xxx BeatType”. Use [+/YES]/ [-/NO] or data dial to change beat type. The range of beat type: 0, 2~9. 2. Press [+/YES] and [-/NO] simultaneously to set the beat type value to its default setting: 004. Metronome Volume 1.
MPG100_Manual_G03_161009.ai 25 2016/10/9 16:17:43 Function Menu Harmony Type 1. Holding down [SHIFT] button, and then press [FUNCTION+]/ [FUNCTION-] button to select harmony type menu. LCD displays “xxx xxxx”. Use [+/YES]/ [-/NO] or data dial to change harmony type. The harmony types are as follows: Number 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 C M LCD Display Duet StandardTrio Full Chord Rock Duet Country Duet Country Trio Block 4 Close 1 4 Close 2 4 Open 1+5 Octave Strum Echo Tremolo Trill 2.
MPG100_Manual_G03_161009.ai 26 2016/10/9 16:17:43 Function Menu MIDI OUT 1. Holding down [SHIFT] button, and then press [FUNCTION+]/ [FUNCTION-] button to select MIDI Out menu. LCD displays “xxx Midi Out”. Use [+/YES]/ [-/NO] or data dial to change MIDI Out channel: 1~16. 2. Press [+/YES] and [-/NO] simultaneously to set MIDI Out channel to its default setting: 001. Power Off This function is used to set the time after which the instrument will shut down if it is not used. 1.
MPG100_Manual_G03_161009.ai 27 2016/10/9 16:17:43 Register Memory The Registration Memory feature can make your performance more easy and efficient. It allows you to save virtually all panel settings to a Registration Memory setting, and you can instantly recall custom panel settings by pressing a single button. Registering the Panel Setting 1. There are 8 memory banks, and each bank has 4 memories (M1-M4). 2. Holding down the [STORE] button, then press one of the registration memory buttons: [M1] - [M4].
MPG100_Manual_G03_161009.ai 28 2016/10/9 16:17:43 Album The album function allows you to practise a song with the preset style, tempo and voice. The piano features a variety of albums. Please refer to the Album List. 1. Holding down [SHIFT] button and then press the [ALBUM] button to turn the album function on or off. 2. When the album function is on, LCD displays the name of album song and the album indicator lights up. Now use the data dial, [+/YES] or [-/NO] button to select an album song.
MPG100_Manual_G03_161009.ai 29 2016/10/9 16:17:43 Record With the easy-to-use song recording features, you can record your own keyboard performances as a user song. Each user song can be recorded with 6 tracks (1 ACCOMP track, 5 MELODY tracks). The accomp track records the accompaniment for a user song, while the melody tracks record melodies for a user song. An accomp track and a melody track can be recorded independently or together, however, you can not record two melody tracks at the same time.
MPG100_Manual_G03_161009.ai 30 2016/10/9 16:17:43 Record Stop Recording 1. When recording is in process, holding down [SHIFT] button and then press the [RECORD] button to stop recording. 2. When recording is in process, if the memory is full, the recording will stop and save automatically, and the LCD displays “Rec_Full”. 3. If you are recording a style, the recording will stop automatically when the ending of the rhythm finishes. Playback Recording 1.
MPG100_Manual_G03_161009.ai 31 2016/10/9 16:17:44 Song The instrument has a variety of songs. All preset songs can be practised with melody-off. Play the Songs 1. Press the [SONG] button to enter the song mode. The LCD shows “SONG” and it will play all songs circularly. 2. Use the data dial, [+/YES] or [-/NO] button to select a song. 3. Press the [START/STOP] button to stop the playback, then press the button again to play the current song in a loop. 4.
MPG100_Manual_G03_161009.ai 32 2016/10/9 16:17:44 MIDI With the MIDI functions you can expand your musical possibilities. This section will let you know what MIDI is, and what it can do, as well as how you can use MIDI on your instrument. What's MIDI? MIDI (short for Musical Instrument Digital Interface) allows a wide variety of electronic musical instruments, computers and other related devices to connect and communicate with one another.
MPG100_Manual_G03_161009.ai 33 2016/10/9 16:17:44 Troubleshooting Problem Possible Cause and Solution The speakers produce a pop sound whenever the power is turned ON or OFF. This is normal and is no cause for alarm. No sound when the keyboard is played. Make sure the master volume is set to an appropriate level. Check if headphones are plugged into the PHONES/OUTPUT jack. The R1/R2/L voice volume (Mixer) settings could be set too low. Make sure the voice volumes are set at appropriate levels.
MPG100_Manual_G03_161009.ai 34 2016/10/9 16:17:44 Specifications Keyboard & Display Keyboard Touch Response Display Voices Polyphony (max.) Voices Layer Split Duo (Twinova) Styles Styles Style Control Style Creator O.T.S.
MPG100_Manual_G03_161009.ai 35 2016/10/9 16:17:44 Voice List NO.
MPG100_Manual_G03_161009.
MPG100_Manual_G03_161009.
MPG100_Manual_G03_161009.
MPG100_Manual_G03_161009.
MPG100_Manual_G03_161009.ai 40 2016/10/9 16:17:45 Style List NO.
MPG100_Manual_G03_161009.
MPG100_Manual_G03_161009.ai 42 2016/10/9 16:17:45 Song List No.
MPG100_Manual_G03_161009.ai 43 2016/10/9 16:17:45 Album List C M Y CM MY CY CMY K No.
MPG100_Manual_G03_161009.
MPG100_Manual_G03_161009.
MPG100_Manual_G03_161009.
MPG100_Manual_G03_161009.ai 47 2016/10/9 16:17:46 Scale Tuning System A tuning system is the system used to define which tones, or pitches, to use when playing music. In other words, it is the choice of number and spacing of frequency values used. The equal temperament (has only one tuning method, and is suitable for keyboard) is the common musical scale used at present, used for the tuning of pianos and other instruments of relatively fixed scale.
MPG100_Manual_G03_161009.