Specifications

6-64
Program Mode
The Program Editor
Harmonic
Thisparameterswitchesbetweenhighandlowharmonicpercussionsettings.Theactualpitchis
controlledbytheLowHarmandHighHarmparameters.Youcantogglebetweenlowandhigh
harmonicsbypressingAssignableSwitch9(SW9)(labeledPercussionPitchH/L.)Assignable
Switch9alsosendsandrespondstoMIDICC89;
values64‐127=High,values0‐63=Low.
VelTrack
Hereiswhereyouspecifythedegreetowhichkeyvelocitycontrolspercussionvolume.Avalue
ofzerocorrespondstonovelocitytracking,whichislikearealtonewheelorgan.Othervalues
addvelocitytracking,sothatincreasedvelocity
resultsinlouderpercussion.
LowHarm
ControlswhichdrawbarisusedasthebasisforthepercussionwhenHarmonicissettoLow.On
anactualtonewheelorgan,thisisDrawbar4(2ndharmonic).Theactualpitchobtained
dependsonthedrawbartuning.
HighHarm
Controlswhichdrawbarisusedasthebasis
forthepercussionwhenHarmonicissettoHigh.
Onanactualtonewheelorgan,thisisDrawbar5(3rdharmonic).Theactualpitchobtained
dependsonthedrawbartuning.
StealBar
Controlswhichdrawbarisdisabledwhenthepercussioneffectisturnedon.Onanunmodified
tonewheelorgan,theninth
drawbaristheonedisabled.Anydrawbarcanbeselected.
KB3 Editor: The PERC2 Page
Parameter Group (Available for each combination of
the Volume and Decay parameters on the PERC1 page)
Range of Values
Percussion Level 0 to 24.0 dB
Decay Time 0.01 to 5.10 seconds, in 0.02-second increments
Organ Volume Level -12.0 to 12.0 dB