Specifications

7-4
Setup Mode
Tap Tempo Button
Adding a Layer Zone
OntheSplit/Layerpage,presstheLayersoftbuttontoaddanewzonetothecurrentlyselected
setup.YouwillbebroughttotheSplit/Layer:LAYERpage(seebelow.)Playthekeyboardasyou
adjusttheseparameterstofindtherightsettings.
Parameters on the Split/Layer: LAYER page:
Layer Program
Usethisfieldtoselectaprogramthat willbecomealayerinyournewsetup.Selectaprogram
fromtheprogramlistbyusingtheCategorybuttons,AlphaWheel,‐/+buttons.Youcanalso
enteraprogram’sID#.Todothis,presstheShiftCategorybutton,entertheID#with
the
alphanumericpad,thenpresstheEnterbutton.
Transpose, Volume, Pan
TheseparametersfunctionthesameforLayerzonesastheydoforSplitzones.Seethe
explanationsfortheseparametersinthe“ParametersontheSplit/Layer:LOWERSPLITand
UPPERSPLITpages:”sectionabove.
LowKey
TheLowKeyparameterspecifiesthelowestkeythatwillplaythenewlayerzoneyouare
creating.SelectthefieldfortheLowKeyparameterandchooseyourLowKeybyholdingthe
Enterbuttononthealphanumericpadandplayingakey.YoucanalsousetheAlphaWheelor‐
/+
buttonstoenteranotenameandnumber.
HighKey
TheHighKeyparameterspecifiesthehighestkeythatwillplaythenewlayerzoneyouare
creating.SelectthefieldfortheHighKeyparameterandchooseyourHighKeybyholdingthe
Enterbuttononthealphanumericpadandplayingakey.YoucanalsousetheAlphaWheelor‐
/+
buttonstoenteranotenameandnumber.
Tap Tempo Button
Tapthe TapTempobutton(locatedtotheleftofthedisplay,belowthemodebuttons)tosetthe
tempoforthecurrentsetup.Thiscontrolsthetempoofanyarpeggiatorsusedinthecurrent
setup,anyriffsthathavetheirBPMparametersettoSetup,anytempobasedeffects,and
the
currentlyselectedsong inSongmode.Setupsreverttotheirsavedtempowhenselected(saved
setuptempoissetintheSetupEditorwiththeTempoparameteronTheCOMMONPage,see
page 7‐63.YoucansetthisparameterusingtheTapTempobutton.)Formoreonoperatingthe

TaptempobuttonandtheTapTempopage,seeTapTempoButton on page 6‐4.)