Specifications

7-6
Setup Mode
The Setup Editor
The Channel/Program (CH/PROG) Page
ThisisthefirstpageyouseewhenyouentertheSetupEditor.Here,youcanselectprograms,
MIDIchannels,andMIDIBanknumbersforeachofthesetup’s16zones.Youcanalsosoloor
muteeachzone.
Program
Thisselectsaninternalprogramtoplayoneachzone.AsyouchangethevalueofProgram,
noticethatMIDIProgramandMIDIBankmatchthelocalprogramandbank numbers
(programs1–127fallintoMIDIBank0,128–255fallintoMIDIBank1,andsoon—bothMIDI
BanksandPC3LE
bankscanhold128programs).Ifyouwanttotransmitdifferentprogramand
banknumbersoverMIDI,highlighteitherMIDIProgramorMIDIBankandselectanewvalue.
NotethatchangingtheProgramparameteragainwillresetboththeMIDIProgramandMIDI
Bankparameterstomatchthelocal
programandbanknumbers.YoucanentertheProgram
EditorfortheprogramonthecurrentlyselectedzonebyselectingtheProgramfieldand
pressingtheEditbuttontotheleftofthedisplay.Exitthe ProgramEditortoreturntotheSetup
Editorofthecurrentsetup.
Destination
ThisparameterdetermineswhetherthecurrentlyselectedzonetransmitsonlytothePC3LE
(Local),transmitsonlytothe MIDIport(MIDI),transmitsonlytotheUSBport(USB_MIDI),
transmitstoapairofdestinations(MIDI+Local,USB_MIDI+Local, orUSB_MIDI+MIDI),or
transmitstoalldestinations(USB_MIDI+MIDI+Local).
Parameter Range of Values Default
Program Program List 1 Standard Grand
Destination Destination List USB_MIDI+MIDI+Local
Channel 1 to 16 Same as Zone #
MIDI Bank 0 to 127 0
MIDI Program (MidiProg) (Depends on MIDI Bank Mode) 1
Status Muted, Active, Solo, Solo+Muted Active
InputChannel None, 1-16 L+M, 1-16 M None
MIDI Bank Mode (BankMode) MIDI Bank Mode List Ctl 0/32
Entry Program Change (EntryProgChg) On, Off On
Arpeggiator On, Off On