Specifications

7-22
Setup Mode
The Setup Editor
166 RiffVel Riff Velocity (See Riffs on page 7-48)
167 RiffDly Riff Delay (See Riffs on page 7-48)
168 TapTempo Tap Tempo (See Tap Tempo Button on page 7-4)
169 KB3Mutes KB3 Mutes—in Setup Mode, values of 63 and below set the
switches to KB3 controls in that setup, and a values of 64 and
above set switches to mute zones (see Set Controls KB3
(KB3CTL) on page 7-66.)
170 -Arp Shift Sets ARPEGGIATOR values for Shift to negative. 0-63 = off,
64-127 = on. (SeeThe ARPEGGIATOR Page on page 7-35)
171 ShiftPatt Selects one of the 128 patterns in the current
ARPEGGIATOR ShiftPatt Bank. (SeeThe ARPEGGIATOR
Page on page 7-35)
172 ShiftPBank A controller value selects the corresponding ShiftPatt Bank
for the ARPEGGIATOR page of a controller’s zone. For
example, controller value 2 selects bank 2, controller value 7
selects bank 7. (SeeThe ARPEGGIATOR
Page on page 7-35)
173 VelPatt Selects one of the 128 patterns in the current
ARPEGGIATOR VelPatt Bank. (SeeThe ARPEGGIATOR
Page on page 7-35)
174 VelPBank A controller value selects the corresponding VelPatt Bank for
the ARPEGGIATOR page of a controller’s zone. For
example, controller value 2 selects bank 2, controller value 7
selects bank 7. (SeeThe ARPEGGIATOR
Page on page 7-35)
175 VelFixed Set’s arpeggiator velocity when ARPEGGIATOR velocity is
set to Fixed. (SeeThe ARPEGGIATOR Page on page 7-35)
176 ShKeyNum Shift Key Number (see below, Shift Key Number, Shift Key
(ShKeyNum, ShiftKey) on page 7-23)
177 ShiftKey Shift Key (see below, Shift Key Number, Shift Key
(ShKeyNum, ShiftKey) on page 7-23)
178 ShKeyNuV Same as 176 ShKeyNum, but the Shift Pattern’s velocity will
be modified by the current velocity pattern of the zone.
Controller
Number
Corresponding
Destination
Name
Description
Table 7-1 Controller Destination List (Continued)