Specifications

7-62
Setup Mode
The Setup Editor
The AUXFX1 and AUXFX2 Pages
PressingtheAUXFX1softbuttonortheAUXFX2softbuttoncallsup,respectively,theAUXFX1
pageortheAUXFX2page.UsethesepagestoprovideoverridesforAuxChainselectionand
otherAuxEffectsparameters,whichallowsyoutochangeanAuxEffectanditsparameters
withouteditingtheprogramof
azone/track(seeOverridebelow.)EachAUXFXpageappearsas
shownbelow(thepageshownbelowistheAUXFX1page):
IfOverrideissettoNo,thetoplineofthepagedisplaystheAuxChainthatisloadedduetothe
AuxFXChannelparameter(seepage 7‐64).On
theexamplescreenbelow,theAuxChainofthe
zone/trackselectedfortheAuxFXChannelparameteris904SaxChamber2.
Override
ThisparameterswitchesonorofftheAuxoverride.SetOverridetoYestoselectanoverride
AuxChainonthispage.SetOverridetoNotoallowAux
FXchainoftheprogramforthe
currentzone(ortrackinSongMode.)
Normally,theAuxEffectsChainsarespecifiedbytheprogramonthespecifiedAuxEffects
channel(seeAuxFXChannel on p age 7‐64forSetupmode,orFXTrack on page 10‐20forSong
mode.)WhenOverrideissetto
Yes,theChainparameterappears,allowingyoutochoosea
differentAuxeffect(whichalsoappliesdifferentsendlevelsandotherparameters.)See
Dest on page 7‐13fordetailsoncontrollingparametersofAuxOverrideeffects.
Chain
WhenOverrideissettoYes,youcanselect anoverrideAuxChainforthe
page’scorresponding
AuxEffect.ThisparameterisnotvisiblewhenOverrideissettoNo.
Parameter Range of Values Default
Override No, Yes No
Chain Chain List 0 None
Send Level [p], -96 to 24 dB [p]
Pre-/Post- Insert [p], pst, pre [p]