Specifications

Setup Mode
The Setup Editor
7-65
tochooseanote.)Withthedesirednoteselected,usetheDestfieldtoselectacontroller
destination(seeTheControllerDestinationList on page 7‐18fordetails.)Setavaluetosendtothe
controllerdestinationwiththeValuefield.Onceadestinationandvalueareset,theplayingthe
key
willsendthevaluetothecontrollerdestinationontheZone’sMIDIChannel(see
Channel on page 7‐7fordetailsonsettingeachZone’sMIDIchannel.)Thismayalsosenda
continuouscontrollermessagetotheMIDIorUSBoutports,dependingontheZone’s
Destinationparameter(seeDestination on page 7‐6fordetails.)

The Setup Editor Utility Soft Buttons
InadditiontotheSetupEditor’spages,therearebasiclibraryandeditingsoftbuttons.Their
functionsaredescribedbelow.
Name
Thisenablesyoutorenamethecurrentsetup.Useanydataentrymethodtodothis,including
thelettersonthealphanumericpad.
Save
PressingSavecallsupthestandardSaveDialog.WhenchoosinganID#,simultaneously
pressingthe‐and+buttons(belowtheAlphaWheel)togglesbetweensavingthesetuptothe 
firstavailableemptylocation,orreplacingacurrentlyexistingsetup.Formoredetailed
instructionsonsaving,seeSavingandNaming on page 5 ‐3.
Delete
Thiserasesasetupfrommemory,freeingupspacetostoresetupsinotherlocations.(Youcan
checkthefreememoryinthePC3LEatanytime,onthetoplineofthepagesinMastermode.)
PressDelete,andyouwillbegivenachoicetoDeleteorCancel.
PressDeleteagain,and an“A r e
YouSure?”messagewillappear.PressYestodeletethesetup,orNotocancel.
FactoryROMsetupscannotbedeleted.
New Zone (NewZn)
PressNewZntocreateanewzonewithdefaultparameters.ThePC3LEimportsthiszonefrom
Zone1of128DefaultSetup.Ifthereareparametersorentirepagesyouuseoften,youcan
createyourownDefaultSetupandsaveittolocation128;pressingNewZnwillthenimport
zonesfromyourcustomDefaultSetup.
Duplicate Zone (DupZn)
Thisaddsanewzonewiththesameparametersasthecurrentzone.
Import Zone (ImpZn)
Youcanimport,or“bringin,”anyzonefromanysetupinmemory.PressImpZn,anduseany
dataentrymethodtochooseasetuptoimportfrom.ThenusetheChan/Zonebuttonstoselect
oneofthatsetup’szones.NowpressImport,andthezoneyouselectedwillbe
addedtothe
currentsetup.
Note:Ifyouareusingall16zonesinasetupandyoutrytoadd,duplicate,orimportazone,a
“NoMoreZones”messageappears.Youmustdeleteanexistingzonebeforeyoucanadd,
duplicate,orimportanynewones.