Specifications

14-4
Tutorials: Setup Mode
Using And Editing A Split Program Setup
Using And Editing A Split Program Setup
OneofthesimplestusesofSetupmodeistocreateasplitsetup,inwhichdifferentrangesofthe
keyboardareassignedtoplaydifferentinstrumentprograms.ThePC3LEcansplitthekeyboard
intoamaximumof16differentinstrumentprograms,thoughoftenasplitoftwoprogramsis
most
useful.Followthesestepstolearnaboutusingsplitprogramsetups:
Part 1: Load The Example Setup
1. Press the Exit button until you reach the ProgramMode page. Next, press the Setup mode button,
located with the mode buttons to the left of the display. This will bring you to the Setup mode main
page.
2. Use the - / + buttons or Alpha Wheel to select the setup 38 Jazz Bass/Piano or use the
alphanumeric pad to enter 38 and press Enter (see below.)
Thissetupcontainsapianoprogramontheupperoctavesofthekeyboard,andanuprightbass
programontheloweroctavesofthekeyboard.
Note:Thepre‐set“split”setupsincluded
withthePC3LEallincludetheword“Split”oraslash(/)in
theirnames,suchas39FretlessBassSplit,and40ZepKB3/Pianet.