Specifications

14-10

Tutorials: Setup Mode

Adjusting The Volume And Pan Of Zones

YouwilllikelywanttoadjustthevolumeofZonesinasetup.Youcanalsoadjustthepan(left/

rightspeakerposition)ofeachZone.Eachsettingiseasilycontrolledinthesetupeditor.For

moredetailsofthesettingsonthispageseeThePan/Volume(PAN/VOL)Page on page 7‐26in



Chapter 7,SetupMode.

Let’slookatthesetup38 Jazz Bass/Piano andadjustthevolumeandpanofZone2which

containsthepianoprogram8Grand“Evans“:

1. If you are not already in Setup mode, press the Exit button until you reach the ProgramMode page,

then press the Setup mode button, located with the mode buttons to the left of the display. This will

bring you to the Setup mode main page. Next, with the setup 38 Jazz Bass/Piano selected in setup

mode, press the Edit button on the front panel. This will bring you to the CH/PROG page of the

setup editor (see below.)

2. From the CH/PROG page, press the PANVOL soft button on the bottom of the screen (see above.)

This brings you to the PAN-VOL page where you can view key and velocity ranges for the current

Zone (see below.)

3. On the PAN-VOL page, use the Chan/Zone buttons to the left of the display to select Zone 2. You

can view the number of the selected Zone in the top right corner of screen (see below.)

Step 2