Specifications

Tutorials: Setup Mode
Assigning Multiple Knobs To Control Volume In Different Zones
14-15
10. With Knob 2 selected in the Controller field, use the cursor buttons to select the DestType field
and then use the Alpha Wheel or - / + buttons to select Ctrl (see below.)
11. With Ctrl selected in the DestType field, use the cursor buttons to select the Dest field. In the Dest
field, press 7 and then the Enter button on the alphanumeric pad to choose Volum e (see below.)
You can also use the Alpha Wheel or - / + buttons to select a destination in the Dest field.
Knob2(labeledModonthefrontpanel)shouldnowcontrolthevolumeofthepiano,whichis
ontheupperhalfofthekeyboard(ifnot,reviewtheprevioussteps.)All
othersettingsonthe
ControllerspageforZone2,Knob2,shouldbeleftattheirdefaultvalues.
12. To finish, press the Exit button to the right of the display to exit the Setup Editor and save your
changes to this setup under a new ID#. SeeTheSetupEditorsectionatthebeginningofthis
chapterfordetailsonsavingwhenyouexittheSetupEditor.
IfyouhaveasetupwithmoreZones,youcan
repeatthesamestepsforeachadditionalZone,
usingadditionalKnobs.