Specifications

Program Mode

V.A.S.T. and KB3 Programs

6-7

YoucanalsochangetheprogrammedsettingsfortheKB3‐modebuttonstoperformnon‐KB3

functions,suchascontrollinganAuxeffect,bychangingthesettingsontheProg ramEditor

Parameterspage.

Table 6-2 KB3 Mode Effects Buttons and Corresponding Parameters

Additional Controller Assignments In KB3 Mode

OtherdefaultassignmentsforfactoryKB3programsinclude:

Knob10andCCPedal1controltheSwell

(volumepedal)parameter.

Knob11controlstheLeakageparameter,whichcontrolsthelevelofsimulatedsignal“bleed”of

adjacenttonewheels.Generally,turninguptheleakageparametercreatesa“dirtier”organ

sound.Thiscanbeusedforemulatingdifferentagedorgans,asanolderorganwillhavemore

leakageas

itagesanditscapacitorsbegintoleak.

TheModWheelcontrolsDistortionDrive.

SwitchPedal1(thesustainpedal)controlstheRotaryFootSwparameter,whichtogglesthe

Rotaryspeedbetweensloworfast.

Switch #

Effect