Specifications

Program Mode
The Program Editor
6-33
Inadditiontohavingaselectablefunction,eachfunctionblockhasthreeeditableparameters:
numberofinputs,numberofoutputs,andblocksize(theOutputModeparameterisaneditable
parameterofthealgorithmasawhole).WhenyoufirstentertheEditAlgpage,therewillbea
cursorinthe
parameterfield,andthefirstblockofthealgorithmwillbehighlighted.Toselecta
blockforediting,movethecursordownthedisplayuntilnoparameterfieldishighlighted;
then,usingthe<and>buttons,highlighttheblockyouwishtoedit.Pressthe^buttontomove
thecursorbackintotheparameterfields,andthenselecttheparameteryouwishtoedit.
TheOutputModeparameterdeterminesthenumberofoutputsfromthealgorithm.With
OutputModesettoNormal,thealgorithmhasoneoutput.WithOutputModesettoSep.L/R,
thealgorithmhastwo
outputs,eachofwhichissenttoaseparatestereochannel.
Toeditthesignalpath,selecteitheraninputofablockoranoutputoftheentirealgorithm.By
scrollingwithAlphaWheelorthe‐and+buttons,youcanseeeverypossibleconfigurationfor
thatselectedsignal
path.
The DSP Control (DSPCTL) Page
Beforereadingfurther,besuretoreadAlgorithmBasics on page 6‐28andCommonDSPControl
Parameters on page 6‐29.
PresstheDSPCTLsoftbuttontocalluptheDSPControl(DSPCTL)page,whichisdisplayed
below:
Parameter Range of Values Default
Inputs 1, 2 1
Outputs 1, 2 1
Number of Blocks 1 to 4 2
Output Mode Normal, Sep. L/R Normal