Specifications

Program Mode
The Program Editor
6-35
The DSP Modulation (DSPMOD) Page
Beforereadingfurther,besuretoreadAlgorithmBasics on page 6‐28andCommonDSPControl
Parameters on page 6‐29.
PresstheDSPMODsoftbuttontocalluptheDSPModulation(DSPMOD)page,whichis
displayedbelow:
Eachfieldintheleft‐handcolumnofthepageisafunction‐parameterofthecurrentlayer’s

algorithm.Youcancoarselyadjustthefunction‐parameterintheseleft‐handfields—asnotedin
CommonDSPControlParameters,anyadjustmentsmadetothefunction‐parametersonthe
DSPMODpagearereflectedinthecorrespondingfunction‐parametersontheDSPCTLpage.
Theright‐handsideoftheDSPCTLpageis
thesubpageofthehighlightedfunction‐parameter—
onthesubpagearetheprogrammableparameters.Toaccesstheparametersonthesubpage,
highlightthefunction‐parameteryouwishtoedit,andthenpressthe>buttontomovethe
cursorintothesubpage.
Eachfunction‐parameter’ssubpagecontainstheprogrammableparametersof
thehighlighted
function‐parameter.Byassigningcontrolsourcestomodulateafunction‐parameter,youcan
enablereal‐timecontrolofyourprogram’ssoundandbehavior.YoucanassignSrc1toany
controlsource,andcanspecifyitsmaximumvaluewiththeDepthparameter.Src2isdifferent—
youcanassignitto
anycontrolsource,butcanalsoassignacontrolsourcetoitsmaximum
valuewith theDptCtlparameter.YoucanthenspecifytherangeofSrc2’sdepthwiththe
MinDepthandMaxDepthparameters.
Note:ThePC3LEfeaturesaneasyshortcutforquicklyassigninganyofthePC3LE’srealtimecontrollers
(knobs,wheels,
buttons,etc.)toacurrentlyselectedparameter(suchastheSrc1andSrc2parameters
above.)Withasourceparameterfieldselected,simplyholdtheEnterbuttonandmovethedesired
controllertoselectitasacontrolsource.
Thelabelofafunction‐parameterdependsonitscorrespondingfunction‐blockin
thecurrent
layer’salgorithm.TheaboveDSPMODpagecorrespondstothefollowingalgorithm:
Parameter Range of Values Default
Source 1 Control Source List Off
Depth (Depends on Function) 0
Source 2 Control Source List Off
Depth Control Control Source List Off
Minimum Depth (Depends on Function) 0
Maximum Depth (Depends on Function) 0