Datasheet

Introduction
Staying Current
1-2
• on the rear panel, two jacks for optional pedal controllers: one for a switch pedal and
the other for a continuous controller pedal.
Pedals (Optional)
As described above, the SPS4 has two jacks on the rear panel for optional pedal controllers.
One of these jacks is for one or two switch pedals, which are typically used to control
two-state (i.e., on / off) parameters such as sustain and mute zone. The other jack is for a
continuous control (or CC) pedal typically used to control a multi-state (i.e., “continuous”)
parameter such as filter frequency or LFO amount.
Note that switch pedals can be used to control continuous parameters just as continuous
control pedals can be used to control two-state parameters.
Your Kurzweil dealer stocks the following pedals:
• FS-1 Standard box-shaped switch pedal
• KFP-1 Single piano-style switch pedal
• KFP-2S Double piano-style switch pedal unit (one stereo plug)
• CC-1 Continuous pedal
Staying Current
Be sure to check the Kurzweil Music Systems website at www.Kurzweil.com for new
documentation and software updates before using your new instrument.
Do You Have Everything?
Your SPS4 package should contain the following in addition to your instrument:
• Power cable and 19V 3.42A power adapter
• Sustain pedal
• USB cable (Type-A-to-Type-B)
• Musician’s Guide (this book)
• Warranty card
If you don’t have all of these components, please contact your Kurzweil / Young Chang
dealer.
Your SPS4 has a built-in sound system so it is ready to play with only the factory provided
accessories required. The next chapter tells you how to get started with your new instrument.