Operating Instruction and Parts Manual for 350/600 Gas Gas Model Series With Optional Tri-Pod Stand WARNING DO NOT ATTEMPT TO START OR OPERATE THE MACHINE UNTIL ALL THE INSTRUCTIONS HAVE BEEN READ AND UNDERSTOOD BY THE OPERATOR.
SHOULD YOU REQUIRE ANY SET-UP OR OPERATING ASSISTANCE WITH YOUR PRODUCT, 2 DO NOT RETURN TO ORIGINAL PLACE OF PURCHASE •After referring to the operation manual, if assistance is still needed, please consult our web Site at www.kushlanproducts.
Model 350GAS & 350GAS With Stand Parts List ITEM 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 PART NO 35-1 35-2 35-3G 35-4 35-5 35-6 35-7 35-8 35-9 35-10 35-11 35-12 35-13 35-14 35-15 35-16 35-17 35-18 35-19 35-20 35-21 35-22 35-23 35-24 35-25 35-26 35-27 35-28 35-29 35-30 35-31 35-32G 35-33G 35-34G 35-35G 35-36G 35-37 35-38 35-39 35-40 35-41 35-42 35-45G 35-46 35-47 35-48 35-49G 35-50G 35-60G DESCRIPTION Frame
Model 350GAS With Stand Parts List 4 Stand for 350Gas Mixer Item Parts No 35-37 37 Description Support Brace 38 35-38 Vertical Pipe Support 39 35-39 Horizontal Rest Bracket 40 35-40 Leg Support 1 Pipe 41 35-41 Leg Support 2 Pipe 44 35-42 Whizlock Screw
Model 600GAS & 600GAS With Stand Parts List ITEM 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 PART NO 60-1 60-2 60-3G 60-4 60-5 60-6 60-7 60-8 60-9 60-10 60-11 60-12 60-13 60-14 60-15 60-16 60-17 60-18 60-19 60-20 60-21 60-22 60-23 60-24 60-25 60-26 60-27 60-28 60-29 60-30 60-31 60-32 60-33G 60-34G 60-35G 60-36G 60-37G 60-38 60-39 60-40 60-41 60-42 60-43 60-44G 60-45 60-46 60-47 60-48 60-50G 60-51G 60-52G
Model 600GAS With Stand Parts List 6 Stand for 600Gas Mixer Item Parts No 60-38 40 Description Support Brace 42 60-40 Vertical Pipe Support 41 60-39 Horizontal Rest Bracket 44 60-41 Whizlock Screw 45 60-42 Leg Support 1 Pipe 43 60-43 Leg Support 2 Pipe
Assembly Instruction 7 Step 1 Wheel Assembly Step 2 With the long end of wheel hub facing out assemble. Step 3 Install Wheels as shown, pushing axle rod end out and the other end into the frame. Step 4 Put washers on the axle, then fix R clips into holes. Step 5 Take apart and remove all bolts from drum plate Step 6 Put the shaft through the hole in the drum. Turn drum until the holes line up. Put in 3/8 x 1-1/4’’ whizlock screw. Then install blade. Note: Do NOT tighten until all screw are in place.
350 Gas How to Mix Concrete 1. You will need approx. 2 1/2 gallons of water. 2. 2-80 lb bags of premix concrete 3. Start Mixer in motion 4. Add 2 gallons of water 5. Add 1-80 lb bag of premix concrete NOTE: Mixture will be very sloppy 6. Slowly add 2nd bag of concrete. 7. Add 1/2 gallon of water slowly to obtain desired thickness. 8 How to Mix Sand & Gravel 1. Use a 8 1/2 X 12” square shovel 2. Portland cement, gravel or round stone and masonry sand. 3. Start mixer in motion. 4.
Maintenance Final Assembly • Pedestal Stand Assembly 5. Once mixer has been tilted upright onto the stand, the mixer should be tipped back into mixing position before operating. (Figure 6) 1. Place two halves of the support legs together and insert pivot tube through the center of the legs to join together. (Figure 1) 2. Insert locking pin through bottom of pivot tube. -Tip mixer, as if dumping contents, and place squarely on opening of drum.
Kushlan Products Limited Warranty Policy Kushlan Products makes every effort to assure that its products meet high quality and durability standards and warrants to the original retail consumer purchaser of our products (you) that each such product be free from defects in materials and workmanship as follows: ONE(1)YEAR limited warranty on motors. This warranty covers replacement of parts found to be defective in material or workmanship for a period of 90 days from the date of purchase.