Owner manual

ManualsBrandsKushlan Products ManualsPower ToolsIndustrial Portable Tripod Mixer

KU S H LA N

P R O D U C T S ,

LLC

Do not attempt to start or operate the Do not attempt to start or operate the

machine until all the Instructions have been read machine until all the Instructions have been read

and Understood by the operator. and Understood by the operator.

Failure to do so could result in Serious bodily Failure to do so could result in Serious bodily

injury and/ or Property damage!injury and/ or Property damage!

Do not attempt to start or operate the

machine until all the Instructions have been read

and Understood by the operator.

Failure to do so could result in Serious bodily

injury and/ or Property damage!

WARNING

12010 Dairy Ashford Road, Suite 160, Sugar Land, TX 77478

(281) 313 - 2506  (800) 469-4178

with Interchangable drums

Industrial Portable

Tripod Mixer

Operating Instructions

Parts Manual

and

for

Summary of content (12 pages)

PAGE 1
Operating Instructions and Parts Manual for Industrial Portable Tripod Mixer with Interchangable drums ! WARNING ! Do not attempt to start or operate the machine until all the Instructions have been read and Understood by the operator.
PAGE 2
SHOULD YOU REQUIRE ANY SET-UP OR OPERATING ASSISTANCE WITH YOUR PRODUCT, DO NOT RETURN TO ORIGINAL PLACE OF PURCHASE. · After referring to the operation manual, if assistance is still needed, please consult our web Site at www.kushlanproducts.com. From our web site you may e-mail us directly. · If assistance is still required, please call our customer service department at 1-800-469-4178.
PAGE 3
! Safety Instructions For the safety of yourself and others around you, it is extremely important that you observe the following notes. 1. Keep hands and clothing away from moving parts at all times. 2. Do not operate this machine under the in uence of alcohol or while taking medication that impairs the senses or reactions. 3. Make certain that the work area around the machine is clear of debris and obstructions. 4. Keep all unauthorized and untrained people away from the machine at all times. 5.
PAGE 4
Model 450DD & Removable Liner Parts List Reference DESCRIPTION 1 Plastic Drum 2 Note Wire basket for Drum 3 Hex Socket Screw 4 Gear Motor Mounting Base 5 Gear Motor 6 R-Clip Pin 7 Dump Handle 8 Side Handle 9 Bolt M10X100 10 Pivot Axle Pin 12 11 Draw- Bar 12 Bolt 13 PU Foam Wheel 14 Wheel Bearing 16X22 15 R-Clip Pin 3 16 Main Frame 17 Swivel Bracket 18 R-Clip Pin M14X75 3 M10X60 3
PAGE 5
Industrial Portable Tripod Mixer Assembly KU S H LA N P R O D U C T S , LLC 4
PAGE 6
Gearbox and Motor Assembly Parts List 1 2 3 4 5 6 7 8 105890DM01 105890DM02 105890DM03 105890DM04 105890DM05 105890DM06 105890DM07 105890DM08 9 10 11 12 105890DM09 105890DM10 105890DM11 13 14 15 16 17 18 19 20 21 22 23 24 25 26 105890DM13 105890DM14 105890DM15 105890DM16 105890DM17 105890DM18 27 105890DM27 105890DM28 105890DM29 105890DM30 105890DM31 105890DM32 105890DM33 105890DM34 105890DM35 105890DM36 105890DM37 105890DM38 105890DM39 105890DM40 105890DM41 28 29 30 31 32 33 34 35 36 37 38 39 40 41
PAGE 7
Gearbox & Motor Assembly 2 4 13 9 4 10 40 11 43 12 8 6 41 38 42 39 35 37 36 36 8 47 7 42 37 36 3 KU S H LA N P R O D U C T S , LLC 6
PAGE 8
! Important Safety Instructions CAUTION The Cement Mixer has been designed to meet certain safety standards. However, as with aby type of tool or machinery one should pay close attention to certain Do s and Don ts DO S...
PAGE 9
! Assembly Instructions Step 2 GEARBOX & MOTOR ASSEMBLY Fit the gearbox motor assembly and mounting frame (A) into the swivel bracket (B) with the pivot axle ( C ) Slide the cotter pin (D) through the axle pivot hole. Slide the swivel bracket onto the upright main frame. The gearbox and motor assembly are mounted into this swivel bracket. (When mixing concrete, align the drum in the position you intend to poor concrete from, tighten down stabilit y bolt and star unit.
PAGE 10
! Step 4 TILTING HANDLE Assembly Instructions Finally, insert both tilting handles (A) in the gearbox motor assembly mounting frame(B) (as shown) and lock using the cotter pin ( C ) ! Transporting the Mixer CAUTION Disconnect the power cord. Hold the support leg and dump handle and move as shown below. Male sure there is no material in the drum.
PAGE 11
Operation CAUTION 1. Position the mixer on a level surface. (NOTE: Maximum slope is 5° (degrees). Before lling the drum, make sure the mixer can empty into a wheel barrow). 2. Use a 3 prong, grounded, 110v/120v power connection. Although the minimum gauges are listed below, we recommend that a 14 gauge (AWG) wire be used for al lengths. Cord Length (Total Feet) 25 50 100 150 AWS (Wire gauge) 18 16 16 14 120 Volts 0-6 Ampere Rating 3.
PAGE 12
Kushlan Products,LLC Limited Warranty Policy Kushlan Products makes every e ort to assure that its products meet high quality and durability standards and warrants to the original retail consumer purchaser of our products (you) that each such product be free from defects in materials and workmanship as follows: ONE(1)YEAR limited warranty on motors. This warranty covers replacement of parts found to be defective in material or workmanship for a period of 90 days from the date of purchase.