User's Manual


2.6
Indicators:
Stationary: “TARGET” window displayed.
Moving: “PATROL” and “TARGET” both
displayed in window.
Low Battery: (Warning) Flashing “BATT”
displayed and an audio warning tone
sounds every 2 minutes when
internal voltage falls below
approximately 6.6 VDC.
Approximately 30 minutes of
transmitter operation remains.
Low Voltage: (Error) Steady “BATT” displayed
when internal voltage falls below
approximately 6.0 VDC. The
transmitter is disabled, but locked
speeds will remain. At
approximately 5.4 VDC, the
FalconHR shuts itself off.
Radio Frequency “rFi” displayed in the target window
Interference: during strong radio frequency
interference. Active speed displays
are blanked during this condition.
Locked speeds will remain.
Error: “Err” displayed when an internal
error in the operating system is
detected. Active speed displays will
blank. Locked speeds will remain.
Hold: “HOLD” is displayed when the
system is not transmitting.
Controlled by the trigger in handheld
mode or remote control in mounted
mode.