User's Manual

 
3.5
5. Momentarily press the PWR switch on the rear panel of
the FalconHR. (Refer to Section 4.1 for location and
function of the switches.) The FalconHR will proceed
through an indicator test, internal test and several other
reliability tests. Select the Stationary “ALL” mode of
operation by pressing the MODE switch, if required.
(If “PATROL” is displayed, press the MODE switch.)
Only “TARGET” will be displayed in the stationary
mode with the patrol window indicating “ALL”, “APr”,
or “rEc”.
FAST
TARGET
6. Momentarily press the AUD (audio) switch. The
TARGET window will display “Aud” and a number
from 0 to 5 indicating the audio level. With “Aud”
displayed, press the RNG (range) switch until level 3 or
4 is displayed. Also, with “Aud” displayed, press the
MODE switch, which will unsquelch the audio.
7. Start the patrol vehicle and position the A/C-heater fan
to a mid-range speed. Move the FalconHR left or right
of its initial location and listen for any raspy sound (fan
interference) in the audio. Position the FalconHR to
minimize the amount of interference.
CAUTION: Review the airbag warning statement
shown at the end on this Sec. before securing
the dash bracket.