User's Manual

  ! 
13.3
13.3 TEST MODE
TEST MODE
PATROL
TARGET
TEST
In Test mode the
TEST indicator
will flash
.
Moving mode tuning fork
speeds are indicated in the
Target
&
Patrol windows
.
TARGET
TEST
Stationary tuning fork
speed is indicated in
the TARGET window
Pressing the TEST button places the radar in test mode,
which is indicated by the flashing TEST indicator. While in
test mode, the radar will display all speeds, both moving
targets and non-moving targets such as tuning forks. The
unit will remain in test mode for 30 seconds. Selecting a
new mode, such as changing from stationary to moving,
will refresh the timeout to 30 seconds allowing fork testing
of all modes.
NOTE: Pressing the test button while in test mode will turn
off test mode immediately.