User's Manual

SECTION 2--SPECIFICATIONS
2.7
Indicators:
Stationary: Stationary operation displays “STA”.
Stationary modes display “ALL”,
“APR ONLY”, or “REC ONLY”.
Moving: Moving operation “PATROL” above
the patrol speed area.
Low Voltage: Displays “LOW VOLTAGE” in the
message area when internal voltage
falls below approximately 8.5 VDC.
The transmitter is disabled, but
locked speeds will remain.
Radio Frequency Displays “RFI ERROR” in the
Interference: message area during strong radio
frequency interference. Active speed
displays are blanked during this
condition. Locked speeds will
remain.
Timing Error: Displays “XTAL ERROR” in the
message area when an internal error
in the operating system is detected.
Active speed displays will blank.
Locked speeds will remain.
Transmitter Hold: Displays “HOLD” above the active
target speed area and in the message
area when the system is not
transmitting. (Controlled by the
front panel or remote control).