User's Manual

SECTION 3—INSPECTION AND INSTALLATION
3.4
3.3.2 FRONT ANTENNA MOUNTING
Provided with the Raptor RP-1 is a windshield-type
mount for the antenna. Contact your District Manager or
Kustom Signals' Customer Service department for other
optional antenna mounts.
1. Attach the antenna to the mount.
2. Use the antenna cable to connect the antenna to the
Raptor RP-1's processing unit, front antenna port.
Refer to Sec. 4.1 for antenna port location.
3. Connect the Raptor RP-1's power plug to the proper
power source.
4. Momentarily depress the POWER switch on the front
panel of the Raptor RP-1 (refer to Sec. 4.0 for location
and function of front panel switches). It will process
through the power-up sequence and internal tests as
described later in Sec. 6. Select Stationary mode ALL
by depressing the remote MODE switch until “STA”
and “ALL” are displayed in the Patrol area. Both
directional indicators (front antenna) will be lit.