Congratulations, you now own Kustom's KPM7200 Powered Mixer, a 24-bit digital, portable and powerful 200 Watt PA mixer/amplifier. The Kustom KPM7200 is easy to operate and easy to understand. Before operating your KPM7200, please read and understand all setup and safety instructions.
ENGLISH FRENCH Danger Exposure to extremely high noise levels may cause a permanent hearing loss. Individuals vary considerably to noise induced hearing loss but nearly everyone will lose some hearing if exposed to sufficiently intense noise for a sufficient time. The U.S. Government's Occupational Safety and Health Administration (OSHA) has specified the following permissible noise level exposures: Danger L’exposition a des niveaux eleves de bruit peut provoquer une perte permanente de l’audition.
SETUP DIAGRAM A MIXER FRONT 15 16 17 18 19 20 21 22 23 1 2 3 4 24 5 25 6 26 7 8 9 10 11 12 13 14 SETUP DIAGRAM B MIXER REAR 27 28 29 30 2
EXPLANATION OF CONTROLS FRONT PANEL 1) Effects Controls: Adjusts the amount of signal that is sent to the digital effects processor. 2) Monitor Controls: Adjusts the amount of signal that is sent to the Master Monitor control. 3) Tone Controls: Adjusts the balance of bass and treble from the individual channels. 4) Main Controls: Adjusts the volume of the individual channel. 5) Line Input: Input connection for 1/4" line level sources (Keyboards, drum machines, etc.
23) Channels On Indicator: Channels are active when LED is lit. 24) Playback Volume: Controls the volume from the Playback RCA input jacks (25). NOTE: The Playback feature is not affected by the Main Master control and will remain active even when the mute function is active via the footswitch. 25) Playback RCA Jacks: Input connector CD, Tape or any line level stereo signal source. Allows you to play recorded music through the mixer.
PLAYING • Press the Power switch (28) to the ON position. • Turn the Main Master control (20) to the 12 O'clock position. • Turn the Main control (4) clockwise on each channel to achieve the desired volume. (One channel at a time) • After you are satisfied with the basic mix of the individual channels, use the Main Master control (20) to adjust the overall volume of the mixer. • Use the Graphic Equalizer slide controls (19) to control feedback and contour the audio to the overall desired sound.
6
KPM7200 Specifications Model Output Power Frequency Response Total Harmonic Distortion Hum & Noise System Gain Crosstalk Input Channel Equalization Master Equalization Digital Effects Phantom Power Footswitch Power Requirements Dimensions KPM7200 200W 160W 20Hz-20kHz KPM7200 Powered Mixer 4 ohms @ 5% THD 4 ohms @ 0.4% THD Actual response is tailored to speaker cabinet for accurate acoustical response. less than 0.
EC Declaration of Conformity We: Kustom Musical Amplification Inc. 4940 Delhi Pike Cincinnati, OH 45238 Tel: 1-513-451-5000 Fax: 1-513-347-2298 www.kustom.com Declare that the product Product name: Kustom Product model number: KPM7200, Contains one KPM7200 to which this declaration relates is in conformity with the following standards; EN55013 (A12) : 1995 Limits and methods of measurement of radio disturbance characteristics of broadcast receivers and associated equipment.
Kustom Inc., 4940 Delhi Pike, Cincinnati, OH • USA (800) 999-5558 Fax: (513) 347-2192 / www.kustom.