User Manual

Enable or disable PIN, and change PIN.
ThePIN Managment Screen contains the following fields:
 PIN/PUK Attempts - display the number of PIN attempts and PUK attempts.The default number of PIN
attempts is 3, and PUK attempts is 10; if PIN attempts larger than 3, it will require PUK to unlock the
SIM card, and if PUK attempts larger than 10, the SIM card will be abandoned When you input PIN
code to enable or disable PIN, if input wrong PIN code, the number of PIN attempts will decrease by 1,
same as PUK
 Enable/Disable PIN - Enable PIN:Input correct PIN code and press the right button, PIN will be enabled
successfully, and the right button will display as "Disable PIN". Disable PIN:Input correct PIN code and
press the right button "Disable PIN", PIN will be disabled successfully, and the right button will display
as "Enable PIN".
 Change PIN - Enter current PIN, then Enter New PIN and press "Save" button, the PIN will be
changed.
3.2.4 Manual Network
Manual Network Screen
The Manual Network Screen displays the function of manually scan network operators and configure the
selectable network operator
The Manual Network Screen contains the following fields:
 Manual Scan Network button - Click the button will triggle router to scan network operators. The scan
results will be displayed on drop-down menu of "Selectable Network".
 Selectable Network - Then network operators will be displayed after click the Manual Scan Network
button, choose one network operator and save, the router will connect to the selected network if no
error happens.
 Manually select network when system start - choose the option "I want to manually select network
when system start", the network should be selected manually when system start.
 LTE background scan network time - On drop-down menu, you can choose the inteval time and save.
Then the inteval time to LTE background scanning will be configure to router.
3.3 Home Network
3.3.1 DHCP Settings
The Home Network screen displays the DHCP settings and allows users to define IP Addresses range to be
assigned to the network devices. The DHCP assigns dynamic IP addresses to devices on a network. DHCP
ensures that network devices can have a different IP address every time the device connects to the network.
The Home Network screen is used to configure the built-in DHCP Server to assign IP addresses to the
computers and other devices on the user's LAN.
DHCP Settings
The DHCP Settings section contains the following fields:
 DHCP Range -- Selects the basic IP address range, in which the start and the end DHCP IP addresses
range are assigned.
 Start DHCP Address and End DHCP Address -- Defines a range of addresses that the DHCP Server
uses when assigning addresses to computers and devices on your Local Area Network. Any
addresses that are outside this range are not managed by the DHCP Server; these could, therefore, be
used for manually configured devices or devices that cannot use DHCP to obtain network address
details automatically.