User Manual

3.5.2 Configuration Management
Configuration Management
Restore Factory Settings - This option resets the router to the factory defaults. Please note that the existing
settings will be lost.
3.5.3 Software Upgrade
The SW Upgrade screen is used to check for latest firmware versions and to update Marvell router router if a
new version is available.
Software Information
The Software Information section provides information about currently used firmware version.
Software Upgrade
The Software Upgrade section is used to upload a firmware updated file when available on the user's
computer.
The Software Upgrade contains the following fields:
 Select a file for manual upgrade -- Browses for the file which contains the desired firmware version.
3.5.4 SD card Management
Management of SD card usage and network user name and password.
The Management of SD card
The Management of SD card contains the following fields:
 SD card use mode setting -- Set the SD card access is through the network or USB connection .
 SD card user management -- Set user name and password when using SD card via the network .
the Default of User name and Password:
 Username -- admin
 Password -- admin
4 Safety & Notice
WARNING: Please pay attention to these guidelines, it’s dangerous and may break the law, even the
manufacturer will not undertake any responsibility to the user who does not follow with the following
recommendations or improper to use the mobile phone.
4.1 General matters
 Please obey laws, regulations and signs when near an area storing fuel, chemicals, or volatile
materials.
 Please keep equipment, batteries and chargers away from children, to prevent them from injuring
themselves with them.。

In order to prevent damage to your equipment, only accessories, designated by my company such
as batteries and chargers, may be used with your equipment. The use of other batteries or chargers