User Manual

2.3.1.1 The iPhone connection instructions
Enter into the Settings, click on the "Wireless LAN", the iPhones automatically brush Wi-Fi list, find
LTE_XXXX, click “Connect”, then input password to connect. (LTE MiFi is encrypted by default, the default
password is 12345678)
2.3.1.2 Android system connection instructions
Into Settings/WLAN, open the WLAN, find the SSID, click “connect”, enter the password (different mobile
phones may have different operating mode).
2.3.1.3 Computer connection instructions
Device does not require any drive, it supports a variety of operating systems, such as Windows 7, Windows
Vista (64 - bit or 32-bit), Windows XP, and so on. Before establishing a connection, you must ensure that the
computer is equipped with a wireless network card.

Select start/control panel/network/wireless network connection.

Click view available wireless connection, there shows a list of the wireless network connection.
 Connect LTE_XXXX, enter the password, wait a moment, the computer screen at the bottom right
corner shows a wireless network connection icon, wireless network connection is successful at this time.
If still can't get to the Internet right now, please try the following:
 Through the browser to open the WebUI interface, the default address is "http://192.168.0.1", the
default password is "admin", and click ok. As shown in the figure below.