User Manual

3 Interface setting operation
This chapter describes only for administrator accounts log in. When Computers and equipment connect
through Wi-Fi, input "http://192.168.0.1" in the browser's address bar, the default password is "admin", and
click Log in button to log in WebUI. After the success of landing, displays the quick interface, click “More
Details” to enter the main interface, the following main interface menu is introduced; All settings take effect
after click "Application" button, some sets need to restart the route to work, but some only need to wait for jump
interface end, the specific please refer to screen tips.
3.1 Quick Setup
The Marvell router Quick Setup tab is designed to assist you in connecting your new Marvell router to the
Internet. This Quick Setup procedure guides you through step-by-step instructions on how to get an Internet
connection up and running.
Screen 1 - User Management
Via this screen you can change the router's Username and Passowrd.
The default values for username and password are 'admin' and 'admin'
Screen 2 - Internet Connection Setup
The Internet Connection screen allows the user to configure the Internet connection type.
The main Internet connection types are as follows:
 Disable - No Internet connection. Only the wireless Home Network is active.
 Cellular - This is the default mode of connectivity. You can insert your SIM into the router and the
wireless clients associated can make use of it for internet connectivity! Also note that in this mode, the
ethernet port can be used for connecting any LAN side clients. For 3G USBModem, there are a bunch
of ISP's that we support - you can select one of them from a dropdown list. Also you can update the
router's ISP database by uploading your local ISP settings file.
Screen 3 - Wireless Setup - Wireless Network Settings
The Wireless Connection Setup screen contains the Wireless Network Information (WLAN) section which
describes the wireless connection status. The user can configure wireless settings and security parameters.
 Wireless Network Name (SSID) -- User defined name for the wireless network.
 Wireless Network Password -- User defined password for the wireless network.
 Verify Password -- Makes sure that entered password value is the intended one by comparing this
entry with the one above.